Definitely the best exhaust option for these trucks!! Keith is the man

 

X2 over here!!!

 

Did you just lay under your truck and go on from there? I got my exhaust today and am installing tomorrow. I'm on the fence of buying ramps to make it a little easier to get under the truck.

 

Dont waste money."!! I laid underneath the truck and installed the exhaust on the cardboard the system came in. Make sure you lube your nuts and bolts reAlly well. Its a super easy install.

 

Haha really"

Make sure you lube your nuts and bolts reAlly well.

Lmao!

 

Awesome, thanks for the info brother!!

 

So i finally ordered up my dirty deeds budget system exhaust for my tundra 5.7 cm. The fit and finish of the product are super quality as was the customer service from the dirty deeds shop and employees. Shortly After speaking with keith regarding what I wanted for my truck, i received my exhaust in the mail. The day i put it on was raining and shitty but I was too excited to wait. It took about 20 minutes to install it and was a breeze following their installation video. I left the resonator off which i do not regret, the sound is pretty sick!!! Anyone looking to pick up a system from BA, do not hesitate, it will be worth it!!

So a really stupid Q here: what does the resonator do and why would I want it (currently saving for a muffler from DDeeds - eyeing the TRD replacement System)? Thanks and I apologize for my ignorance on this matter.

 

Never an ignorant question!! Ditchhooker said it best, the resonator is supposed to cut down on drone around a certain rpm. I ditched it because i like the sound without the resonator but everyones different. You wont regret which ever system you decide to go with.

 

around 1600-1800 RPMs you can get some pretty bad drone in the cab, the resonator eliminates it. Empty, the drone is pretty minimal, towing its gets pretty bad. side effect is the resonator refines the sound a little bit as well. it may sound quieter in the cab, but outside it doesn't really change a whole lot on the outside.

 

What's this system cost?

 

http://www.bamufflers.com/

 

Dumped SS Budget. Growly. Raspy. "loudasfuk" =)

 

Loudasfuk is correct sir!! But its a different loudasfuk, its very mellow until you mash on the throttle!! Very nice sounding exhaust!!

 

what are the hp and torque gains associated with the bamuffler's? I'm looking at the 6" version for mine. Thanks

 

Do not quote me, but i believe Keith posted dyno claims on his website with something in the neighborhood of 5-10 hp and 5-10 ft lbs added. If you call him up he will tell you anything you need to know. All of his products are dyno proven which is one of the reasons I went with BAmufflers.

 

I posted a review in the budget system thread when I had mine done. I would recommend Keith's system (and I have tried many different systems). Here's a sound clip.

 

Thanks for the thread guys Anybody with any questions please feel free to shoot me an email dirtydeedsindustries@gmail.com or give me a call 760-877-4234

 

Sounds awesome

 

New BADual Setup

Just picked up setup for my duals from Keith this past week while in CA. Got the x pipe and dual 10 in muffler put on Saturday. Sounds excellent but not as loud as expected but imagine after breaking in little more it will sound off better. No drone to speak of but I replaced a Edelbrock SDT. Probably could have gone with an 8in setup but I am good. Keith was great to work with and builds a quality product. Nott the best video but heck I tried.

https://docs.google.com/file/d/0B3KOTv1DPkIBZmE0YXRLS0k1cE0/edit?usp=docslist_api

 

that came out really nice!! Thanks for posting

 

Issue

Keith/anyone,
so in my previous post I indicated that I just put new BA dual setup with xpipe on and sounds great. Well prior to that I removed my AFE CAI and remapped my Hypertech to stock intake. Have never had any issues with anything until late yesterday afternoon. I get in and start it up and have the check engine with the VSC flashing-of course running like crap! Now I will say that this past Sat/Sun after I put the new exhaust in I was running around town loving the new tone all the while keep the nannies turned off (rarely do that but...). Baffled I disconnected the battery for about 10 minutes. Started it up and code gone with truck running fine but it blew some water out of both tail pipes-never seen that before. Looking for potential ideas of why that may have occured? New mapping? Nannies off? New exhaust setup??? I haven't put but a few miles on it so I don't know what it will do if i take a trip in it. Anybody has any ideas?Thanks.

 

Just condensation

 

definitely just condensation.

With how weird these trucks get when you mod them I first thing to suspect is a quirk. You have done the right thing already by hard reseting the ecu.

If the problem comes back pull the code and text it to me. I'll help with diagnosis. We can definitely figure out what it is.

 

Thanks guys. It was quite a bit that came out and I have never seen that from this truck. Not worried about the condensation but more worried that it threw a trouble code which I am hoping due to changing back to OEM intake, remapping the Hypertech, exhaust and turning the traction control off playing around. I'll blame it on Keith since he sold me the latest toy! Hopefully this was a one time deal.

 

It's defijitely my fault I programmed the exhaust to make you want a BullyDog

 

What I figured but wait...can't hear you because of this new exhaust system is purring! Maybe when I shut this pig off I'll be picking up the BD!