Toyota Tundra Discussion Forum banner
1 - 5 of 5 Posts

· Registered
124 Posts
Discussion Starter · #1 ·
I have an 2010 RW CM. Stock wheels. LRO 3/1 level kit.

I put BFG AT KO 315-70-17 on it a couple of years ago. I have to take the small flaps on the front of the wheel well and slightly "massage" the front of the wheel well with a heat gun. I used a 2x4 to push back the plastic just a little so it would not rub when I hit the brakes in reverse while turning. Never had a problem.

Rides better and looks awesome.
  • Like
Reactions: Ogtoyfan
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.