Toyota Tundra Discussion Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
791 Posts
I have had that issue but not on a Tundra. The vehicle that had that same issue did have a bolt loose and it was loose enough that the internal groves did not mesh together. A simple re-alignment and a bolt re-tightened did the trick. But this may be of no help with what you are experiencing.

I learned from a few guys that I work with that live up north that if we knew it would freeze we would stand the wiper arms up. It looks funny as all get out put it prevents the blades from having issues. Just have to make sure the arm doesnt slam down and crack the windshield.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top