Joined
·
550 Posts
Figure I'd post pictures of my truck here..
Performance-
TRD Supercharger
TRD Tailpipes
BAMuffler 2.5" Mid-pipes, X, and mufflers
G-Tek Fab Airbox Mod
URD Supercharger Pulley
Bullydog Tuner
Lighting-
V-LEDs LED Interior lighting
HID Low Beam & Fogs
VLEDS Reverse lights and blinkers
LED DRLs
Tinted LED Tail lights and Recon 3rd Brake light
Stereo System and electronics-
iPad Mini 3 Retina
Pure i20 Ipod Dock
Audison Bit10D Processor
Audison Voce AV 5.1K Amp
Hertz Mille MLK 3PA 3 way comp set
JL 12W7 Subwoofer trimmed out and in a custom sealed box
Compustar Alarm Remote Start with Drone Mobile
K40 Radar/Laser Detector Shifter
AEM Failsafe Boost/AF Gauge
Info buttons added
Suspension-
Fox Racing front 2.5 Coilovers with Reservoirs
Total Chaos Upper Control Arms
CoachBuilder Rear +2 Shackles
TRD Rear Sway Bar
Wheels/Tires-
20" BMF SOTA Death Metal 0-Offset
Nitto Terra Grapplers 305/55/20
Exterior-
Bushwacker Pocket Style Flares
Undercover Flex Tonneau Cover
Color Matched door handles and mirror covers
LineX Bed Liner
Tint
WeatherTech Visors and Laser Liners
Carriage Works Grille
A picture of the Supercharger installed
I bought the G-Tek Fab SABM (Stock Air Box Mod) Kit and installed it. With my mods my air filter indicator would get sucked down between 11-15. With the air box mod it doesn't get sucked down at all. Definitely fixed the restriction of the air box opening, looks nice also.
Rough Country 2.5-3" Leveling kit. Dealer accidently installed it at 3" Probably going to have it changed to 2.5" Front is higher than the rear right now.
Line X bedliner. They did a great job, removed all hardware and re-installed
Audio Equipment
I didn't want screws to penetrate the cab so we made brackets for the back panel.
Amp is fed digitally coming from an Audison processor mounted in the dash.
K40 RL360i with front G5 Laser Shifters
Front Laser Shifters mounted in the grill
Front radar detector
Rear radar detector
Front radar/laser detection LED
The rear radar detection LED is on the other side of the cluster.
Here is the RF Remote
Here is the AEM Failsafe gauge installed. Monitors and logs Vac/Boost and Wideband 02. Where is was mounted no trimming behind the gauge bezel was needed! Worked out well.
I swapped out my mid section of my TRD cat-back for a stainless BAMuffler setup with an X-Section! It's just slightly louder but the sound is much more refined! Very happy how it turned out..
Ipad Mini Installed
Installed some 20" BMF SOTA Death Metal Wheels and Nitto Terra Grappler Tires
Performance-
TRD Supercharger
TRD Tailpipes
BAMuffler 2.5" Mid-pipes, X, and mufflers
G-Tek Fab Airbox Mod
URD Supercharger Pulley
Bullydog Tuner
Lighting-
V-LEDs LED Interior lighting
HID Low Beam & Fogs
VLEDS Reverse lights and blinkers
LED DRLs
Tinted LED Tail lights and Recon 3rd Brake light
Stereo System and electronics-
iPad Mini 3 Retina
Pure i20 Ipod Dock
Audison Bit10D Processor
Audison Voce AV 5.1K Amp
Hertz Mille MLK 3PA 3 way comp set
JL 12W7 Subwoofer trimmed out and in a custom sealed box
Compustar Alarm Remote Start with Drone Mobile
K40 Radar/Laser Detector Shifter
AEM Failsafe Boost/AF Gauge
Info buttons added
Suspension-
Fox Racing front 2.5 Coilovers with Reservoirs
Total Chaos Upper Control Arms
CoachBuilder Rear +2 Shackles
TRD Rear Sway Bar
Wheels/Tires-
20" BMF SOTA Death Metal 0-Offset
Nitto Terra Grapplers 305/55/20
Exterior-
Bushwacker Pocket Style Flares
Undercover Flex Tonneau Cover
Color Matched door handles and mirror covers
LineX Bed Liner
Tint
WeatherTech Visors and Laser Liners
Carriage Works Grille




A picture of the Supercharger installed

I bought the G-Tek Fab SABM (Stock Air Box Mod) Kit and installed it. With my mods my air filter indicator would get sucked down between 11-15. With the air box mod it doesn't get sucked down at all. Definitely fixed the restriction of the air box opening, looks nice also.

Rough Country 2.5-3" Leveling kit. Dealer accidently installed it at 3" Probably going to have it changed to 2.5" Front is higher than the rear right now.

Line X bedliner. They did a great job, removed all hardware and re-installed

Audio Equipment
I didn't want screws to penetrate the cab so we made brackets for the back panel.
Amp is fed digitally coming from an Audison processor mounted in the dash.












K40 RL360i with front G5 Laser Shifters
Front Laser Shifters mounted in the grill

Front radar detector

Rear radar detector

Front radar/laser detection LED

The rear radar detection LED is on the other side of the cluster.
Here is the RF Remote

Here is the AEM Failsafe gauge installed. Monitors and logs Vac/Boost and Wideband 02. Where is was mounted no trimming behind the gauge bezel was needed! Worked out well.


I swapped out my mid section of my TRD cat-back for a stainless BAMuffler setup with an X-Section! It's just slightly louder but the sound is much more refined! Very happy how it turned out..

Ipad Mini Installed


Installed some 20" BMF SOTA Death Metal Wheels and Nitto Terra Grappler Tires


