Toyota Tundra Discussion Forum banner
1 - 1 of 17 Posts

· Registered
508 Posts
I would sand down then start over just as some other have suggested. As was mentioned make sure it is a warm day and the humidity is low. Make sure you follow dry times per manufacture instructions. I let my vht flash dry for about 15-20 min and same as clear between coats
I didnt use vht clear though. Then color sand and buff/polish till your arm falls off.

Good luck
1 - 1 of 17 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.