Toyota Tundra Discussion Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
452 Posts
One questions for you is, are you running a drop kit for your drive shaft? Running a 12" lift and 40's is gonna stress that drive shaft a bit. It was never designed to be at those angles, so I would not be surprised if you ran into some issues over time. See if you can't find one and it may help you out in the long run.

A couple links.....
http://www.tundratalk.net/forums/tu...t-drop-lifted-tundras-no-more-vibrations.html

CARRIER BEARING BRACKET 2-1/4" / 2007-2013 TUNDRA / 5" & HIGHER REAR LIFT
 
1 - 1 of 1 Posts
Top