Toyota Tundra Discussion Forum banner

Rock Warrior wheels with spacers!

11631 Views 15 Replies 11 Participants Last post by  Fred1985
Just installed my Rock Warrior wheels with 1.25 hub centric spacers I had on already. Also installed my Icon Billet UCA's. The tires are 315/70/17 BFG at/ko's. Front lift is 2.75 inches from Kore coilovers and rear is a 1.5 inch Icon expansion pack.

Attachments

See less See more
4
1 - 16 of 16 Posts
Nice.
that looks nice, what offset would you say, closely resembles the spacer and rw wheels? i have 0 offset right now, and would like to keep it close due to my bw flares. ive been wanting rw wheels, because i like the small rim big tire look like yours.
Looks good!!
That offset is +18
How does it drive at highway speed? Thinking of getting the same spacers for a wider stance....just worry about wheel wobble.
Thanks guys. Wheel spacers are perfect. No wobble.
  • Like
Reactions: 1
nice. make sure to re-tighten once in awhile.
nice. make sure to re-tighten once in awhile.
Blue loctite works well.
Hows your UCA and body mount clearances with the 1.5" spacers and 315/70/17 tires? Thinking on going with this same size on my truck with OME front
Hows your UCA and body mount clearances with the 1.5" spacers and 315/70/17 tires? Thinking on going with this same size on my truck with OME front
The OP said 1.25" spacers - not 1.5
The OP said 1.25" spacers - not 1.5
My bad. Still would like to know with the 1.25" spacers
Just installed my Rock Warrior wheels with 1.25 hub centric spacers I had on already. Also installed my Icon Billet UCA's. The tires are 315/70/17 BFG at/ko's. Front lift is 2.75 inches from Kore coilovers and rear is a 1.5 inch Icon expansion pack.
Did you had to do a body mount chop?
Just installed my Rock Warrior wheels with 1.25 hub centric spacers I had on already. Also installed my Icon Billet UCA's. The tires are 315/70/17 BFG at/ko's. Front lift is 2.75 inches from Kore coilovers and rear is a 1.5 inch Icon expansion pack.

Did you had to cut a piece of the body mount to avoid rubbing? ?
1 - 16 of 16 Posts
Top