Toyota Tundra Discussion Forum banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 ·

I have a 2005 Tundra Crew Cab, trying to remove a defective front passenger door lock actuator. After removing the inner door panel, I have removed 2 bolts on inner door that secure the actuator assembly, and the 3 star screws that secure the latch assy (on end of door) . But for the life of me, I can't remove the actuator assembly from the door panel as it's connected to the outside door handle . Do I have to remove that door handle as part of overall assembly removal? If not, can I get some guidance on how to "uncouple" the actuator assembly from the outside door handle?

Thanks in advance for your advice!


2005 Toyota Tundra Crew Cab
Marietta, GA
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.