Toyota Tundra Discussion Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Just bought a 2006 tundra with a pro com 6 inch lift kit on it and want to dropit back to standard what do I need was going to go to the auto wreckers and pick up the parts but not sure what bits I need. Could do with some pictures or if someone had standard parts maybe we could do s deal there only 41000 on my pick up so not much ware on the parts
 

·
Premium Member
Joined
·
4,183 Posts
Off the top of my head: for the front you'll need spindles and struts. I think there's also a cross member that will need welded back in. In the rear, you'll need new u-bolts. I have the stock spindles and struts from my 05 DC available if you need them. Spindles have around 55k miles. Struts are complete with springs, etc. and have around 45k miles.

Sent from AutoGuide.com App
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top