Toyota Tundra Discussion Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
260 Posts
Discussion Starter · #1 ·
After putting some black wheels on my black Tundra I'm getting the urge to powdercoat the OEM side steps. The side steps have plastic steps in front of each door and plastic end caps. I've already messed with the end caps a little and I'm pretty positive they'll easily pry out. My big question is about the plastic steps. Are these removable? I'm always a little nervous to start prying on something without knowing how it attaches. I'll post a pic so you can see which steps I've got. I like these steps because they're flat and wide and it should be cheaper to coat these than buy new ones that I might not like as much. So anyone have any experience removing the plastic parts? Thanks.
 

Attachments

· Premium Member
Joined
·
590 Posts
Curious as well, I'm about to do the same. I'm told you can just pop them off (told that from a custom shop), but am unsure if that's really the case.
 
  • Like
Reactions: Mr. Creosote
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top