Toyota Tundra Discussion Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
233 Posts
Discussion Starter · #1 ·
Trying to decide between 5100 at the top setting or the middle setting with a 3.5 spindle. Pictures are far and few and I need to decide by sunday. I got everything ready to go.

What did you guys end up doing and if you have any pictures I would appreciate it. At this point, I'm leaning towards the top setting to get almost 6 inches but I want to see if anyone has gone a little lower. Plus I seen some sweet 4.5 and 5 inch lifts but they weren't on spindles. your pics will definitely help me with my decision.

Here's the truck with a 3 inch lift.

Thanks tundra family!


Sent from my LG-LS997 using Tapatalk
 

·
Registered
Joined
·
233 Posts
Discussion Starter · #3 · (Edited)
Anyhow, I went with maxtrac spindles and 5100 at the top setting, with +3 shackes in the back. And it looks beastly. Also, did a ZPC and I hope that brings my crisp throttle back... if not it's shim City for the sensor!
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top