Toyota Tundra Discussion Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I have a 2011 Tundra 4x4 w/ a Toytec 3/1 level kit and 20" stock limited wheels.

I read a bunch online about plus size tires and wheel backspacing, but does anyone know what the backspacing on the stock limited wheel would be for comparison.

Also, I know this has topic has been beat to death, but my Toyota dealership is offer a BOGO deal on all tires. The service rep swears that a 295/65R20 Nitto M/T will fit on my truck on stock wheels. They are a bit bigger than 35".

What do yall think? The Toyota shop deals with these all the time, so it is hard not to trust them, but what I am reading online is that a 35" will rub.
 

·
Premium Member
Joined
·
39,325 Posts
Thought 20's were +50

Sent from my SAMSUNG-SGH-I337
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #5 ·
Blown, Do you have spacers on your wheels or stock? The specs show a 295 is not much wider than a 285, but my fear is rubbing on the UCA. Plus, any problems with traction control?
 

·
Registered
Joined
·
409 Posts
No spacers, the 295 means its 295mm wide ie 285 is 285mm wide 10mm isn't that much considering 5mm per side.
 

·
Registered
Joined
·
3,745 Posts
Thought 20's were +50

Sent from my SAMSUNG-SGH-I337
The Ltd's and platinums are 20x8+60 but the regional packages seem to use 20x9 +50 like the TX edition.
 
1 - 7 of 7 Posts
Top