Toyota Tundra Discussion Forum banner

Fuse for Passenger Map Light?

2K views 2 replies 3 participants last post by  w0lfspyd3r 
#1 ·
Does anybody know if the passenger side map light is on a different fuse than the other map/dome lights?

I was replacing the bulbs with LEDs and mid install, it stopped working, but that one light. No power at the terminals. The normal dome fuse is still intact. I checked several others but can't find any of them popped. Any ideas?
 
#3 ·
Take down the entire upper console. Sometimes when switching out LEDs (it happened to me) the contact points get pushed up and won't make contact with the wires on the LEDs/light bulbs.

If your other map light and dome light are both working, then it's not a blown fuse.

Also, I'd recommend disconnecting the battery before taking the upper console down while you check the leads and connections for the map lights and make any adjustments needed. This will save you from accidentally blowing a fuse.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top