Toyota Tundra Discussion Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
First generation tundra owner. Put new pads & rotors on then they started shimmying. Had tires rebalanced, took calipers off and cleaned & grease pins but still shaking! anyone has had this problem please help with suggestions. Thanks, 1stgentun
 

·
Registered
Joined
·
2 Posts
Just had this happen to me. First, check condition of fluid. Then check the pistons in the calipers for any corrosion. I had 1 seized piston that was causing my issue.
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Just had this happen to me. First, check condition of fluid. Then check the pistons in the calipers for any corrosion. I had 1 seized piston that was causing my issue.
Thanks xXBrownPants1Xx , will order new caliper because when I had caliper off, one piston did look slightly dry & rusty. Thanks again, stay safe!
 
1 - 3 of 3 Posts
Top