[gcasales]

So i recently purchased this kit here https://www.amazon.com/Spy-Tec-Mini-Hardwire-A119S/dp/B01N0GR4ON/ref=redir_mobile_desktop?_encoding=UTF8&refRID=BTJ04N6KFHRPFW2PD2MG&ref_=pd_aw_sim_422_3&th=1

I wanted to know to what fuse would i plug it into for constant power to record while parked?
Also is there anything else i need to make this work? any extra fuses i need to purchase?
Thanks in advance

 

[DSLKSL]

I bought the Blackvue Power Magic Pro. I use this on truck and rav4 you can set a voltage point and a time to let the cam stayed powered up. By setting the voltage once the battery drains to your set point it cuts off. I have mine set for 12 hours and never have an issue. I bought mine from Amazon just do a search for: Blackvue power Magic Pro they are around 20-25 bucks. Note make sure you get a good ground on the black wire. Other than that you just connect to +12vdc all the time and _12vdc on with your key.

 

[13igtymer]

You need two a add a fuse mini low profile cable. You need to tap into a fuse that is on when the key is inserted and another fuse that is on when the car isn't running if you want the dash cam to record when parked.