Joined
·
1,016 Posts
I noticed a good bit of smegma floating around in my windshield washer reservoir and some of it made it's way to the passenger side spray nozzle clogging one side.
I siphoned and rinsed out the reservoir a few times until I could no longer see crap floating around. After that I removed the nozzle, soaked it in hot water, tapped it on a hard service, blew air through it from both ends, repeated the process and I am happy to report that this fixed the problem.
The toughest challenge was figuring out how to remove the nozzle, I used a key to push the center bottom portion below the nipple toward the windshield and unsnap the nozzle. The rest of the process was easy.
![Auto part Toy Gun accessory Personal protective equipment Plastic]()
_ ^^^^^_
I siphoned and rinsed out the reservoir a few times until I could no longer see crap floating around. After that I removed the nozzle, soaked it in hot water, tapped it on a hard service, blew air through it from both ends, repeated the process and I am happy to report that this fixed the problem.
The toughest challenge was figuring out how to remove the nozzle, I used a key to push the center bottom portion below the nipple toward the windshield and unsnap the nozzle. The rest of the process was easy.
_ ^^^^^_
