Toyota Tundra Discussion Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
228 Posts
Discussion Starter · #1 ·
having trouble with the front fender flares.

whats up with the little S clips?

anyone got a detailed thread of how to install these?

the back ones were a breeze but i cant figure out the front ones..


thanks!
 

·
Premium Member
Joined
·
359 Posts
The s clip goes onto the front fender well. The part with the hole goes facing down. Obviously, lol....Screw in the flare to the clip and as u screw it in it gets tight. Sky Cloud Automotive exterior

The pic kinda shows how its acrewed on.. sorry for the bad pic, but u get the idea. was taken from inside the wheel well looking out. You might have to play around with it


Sent from AutoGuide.com App
 

·
Registered
Joined
·
1,296 Posts
Bolt the part of the flare up that uses the mud flap holes. Then line up the flare up against the fender so you know where to put the clips. Slide the clip into the edge if the fender hole down and line it up with the hole on the flare. Screw the flare to the clip. Done!


Sent from AutoGuide.com App
 
1 - 3 of 3 Posts
Top