Toyota Tundra Discussion Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
626 Posts
i hope those are not the mini D2s projectors, i struggled for a while trying and totally hacked up my fog light housing to try and fit it...butt if you get it to work i would definitely give your way a try. the D2s are too wide to try and fit through the front of the housing like a normal retrofit so i tried to get it to work with the projector coming through the back
I got mini H1's i my fogs but I dont turn them on since the bulb touches the fender fender liner making them hard to stay aligned and those fogs bounce around a lot.
 

· Registered
Joined
·
626 Posts
Rytek, your projectors are probably sitting to far back


Sent from AutoGuide.com App
It might also because I pushed the fender liners as far up as I could to get tire clearance. I have to still have to go back in there to rework them
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top