Toyota Tundra Discussion Forum banner
1 - 6 of 6 Posts

· Registered
Joined
·
875 Posts
Discussion Starter · #1 ·
Just curious what people have paid to have one installed.

I have a rear sitting on my bench at home and am pricing shops to do the install.
 

· Registered
Joined
·
875 Posts
Discussion Starter · #2 ·
Per the recommendation of Just Differentials where I purchased the parts, Baertrax in Dallas did the install for $450. With the bearings and shims, the total cost for just the rear was about $1200. Although expensive, I would recommend Baertrax, they are a real off road shop and appear to know what they are doing.

Home | Baertrax
 

· Registered
Joined
·
702 Posts
DIY install on mine took about 2.5 hours with access to a lift and proper air tools and press. I purchsed new bearings so I didn't have to press the old ones off and luckily I was able to use the same shim set up as stock.

Just a rough guidline for time they might charge you..
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top