Toyota Tundra Discussion Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
357 Posts
Discussion Starter · #1 ·
So this thing comes in today.

I can't find any one in the CT area that will touch it.
Trying dealers now with no luck.

Does any one know of a shop in CT or RI that I can take it to?


I'm not even sure what else I need. Do I need to get new bearings?

If so I could just do it myself with the press, I just don't have time
 

·
Registered
Joined
·
160 Posts
So this thing comes in today.

I can't find any one in the CT area that will touch it.
Trying dealers now with no luck.

Does any one know of a shop in CT or RI that I can take it to?


I'm not even sure what else I need. Do I need to get new bearings?

If so I could just do it myself with the press, I just don't have time

I just did mine and yes you need to put in new carrier bearing in the rear end.

Its not that hard just take your time and measurements and be sure to route the copper air tubing so that it does not interfer with the ring gear.
 

·
Registered
Joined
·
357 Posts
Discussion Starter · #5 ·

·
Registered
Joined
·
357 Posts
Discussion Starter · #6 ·
Alright, all parts are in. Just a quick thank you to just diffs for there great service
And quick shipping of the 4.88 gears and rebuild kits.

I hope to have the gears and locker installed next week
Once I have my Bmw out of paint.
 
1 - 6 of 6 Posts
Top