Toyota Tundra Discussion Forum banner

1981 - 2000 of 2041 Posts

·
Registered
Joined
·
6 Posts
I don’t have the kit yet, but plan on purchasing them soon. I want to have all that in place before I have to buy tires (60days).


Sent from my iPhone using Tapatalk


DO CHECK around on the 5100's. I've personally had two sets fail on previous Tundra's. I also work at a Toyota dealership. TRIED to get a customer recently to go for 6112's or Fox's. He did the 5100's for price reasons........ They're leaking already. :(
I was dead set on NOT buying Bilstein's again, for my bad luck in the past. After doing a lot of research on 2.0 fox's and 6112/5160 combo, I went with the Bilsteins. The 6112's are just bigger and I hope stronger.
Have had them on now for about a week. I'm SHOCKED (pun intended) just how much nicer these are over the TRD OEM Bilsteins !

New Methods, here tomorrow, Just need to find tires now :)
 

·
Registered
Joined
·
16 Posts
33s on 18x10

I haven't seen many done this way.

-3 and 1 lift (came on truck at time of second-hand purchase)
-18x10 Moto Metal 970 series wheels with -24 offset
-33x12.50 Treadwright Claw mud tires
-Front mini mudflaps removed
-No skidplate due to plow frame installed
-Bumper moved forward 1/2" to 5/8" due to plow frame being mounted behind bumper to truck frame interface
-Body mount ground, not chopped to provide clearance. Rear mudflap heated and pushed back

Some before pics
 

Attachments

·
Registered
Joined
·
3 Posts
Can someone please post a pic of a fuel assault wheel in a 20x10 w/ -18mm BS?? I want this wheel but can’t seem to find a pic with this offset. I want to put in my 2016 Silver CM with zone 5”. Thanks all!!! Looking to get 1.5-2” sticking out past fender.
 

·
Registered
Joined
·
1,094 Posts
ReadyLift 3/2 with Fuel Maverick 18X9 +1 offset. 285/70/18 Ridge Grapplers
 

Attachments

·
Premium Member
Joined
·
4,837 Posts
10 ply 285/50-22 Nitro Terra Grappler G2's on Powder coated 22" TRD Wheels.
Wow 10 ply on 22” wheels,

That has to ride rougher?
 

·
Registered
Joined
·
16 Posts
You can get away with running load E that low , 35? Mine would melt if I did that

I have no experience with those big of wheels just curious

I’m a smaller wheel big sidewall guy lol, 33” on 18s. I run 43 all the way around unloaded
Looks good, I like the big sidewall look as well. Liked the 17" wheels with the 285/70-17 Ko2's on my 2011 Rockwarrior as well. Little more forgiving over bumps for sure. Ran those 10 plys at 35-36psi as well. I think that was factory pressure as well.
 
1981 - 2000 of 2041 Posts
Top