Toyota Tundra Discussion Forum banner

Alignment Pulling to Right with Camburg UCA

959 Views 2 Replies 3 Participants Last post by  dane
I know this topic has been discussed before, but I'm wondering if there is specific specs when running the Camburg Uniball UCA?

I had it aligned after installed my UCA, King Coilovers, and Tires... pulled to the right. I took it back in today, they said it's dead on spec, yet still pulls right.

Alignment shop said it was the tires, "radial pull" and that the tires may be a bad batch. Took it to Discount and had them cross rotate the fronts, still pulls same direction.

What's the deal?!

1 - 3 of 3 Posts
Mine does too. So annoying

Sent from App
hmm... mine dont pull right.... i will double check tomorrow
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.