I have a 2008 toyota tundra v6. Got in to drive to work the other day and let it heat up and when I went back out to go the blower wasnt working. Later that day went to store and it started working again. Got in today and want working again. So this is where in at. I checked all fuses amd relay's. I know there isnt a resistor for this model and year. I took the blower motor out and let it hang for a min to do a check to see if it was working at all it came on. So my question is this. It has to be a loose connection somewhere right? Bc if a blower motor was going all the way out it would slow down and or wouldnt turn on completely. It wouldnt stop amd start like this would it?