[2qk4u]

I have rockstar 20" wheels. They were on the truck when I got it. I currently have 305/55/20 on with 1.5" spacers. Does anyone know how I can determine way my wheel back spacing is? I'm sure it changed alot since I added the spacers but wanted the wheel out closer to my flare. I'm wanting to know if I would clear 35"s without rubbing with my setup? I don't mind trimming skid plate. Thanks

 

[2qk4u]

Whats the wheel width and offset?

That's the thing. I don't k ow the width or off set. How do I go about funding out if these will work with 35's with my spacers?

 

[2qk4u]

Looks like 20" Rockstars are 8.5" wide with 3 possible offsets, +10, +35 and +50. I believe +35 is the most popular for tundras. With your wheel spacers being 1.5" youre going to run into serious rubbing on the body mount going with a 35" tire.

So since a 35" tire wi be a little wider possibly I may not need the spacers. Think I might be good then? One of my buddies told me that they usually stamp the offset on the inside of the wheel so I will look for that tomoro. Once I find this out I will ask again on here what u all think. Don't want to get 35"s and they not work with my wheels.