Toyota Tundra Discussion Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
I have a 2014 tundra and I prefer the halogen bulbs actually using LEDs in the halogen housing. But wanted to upgrade to the black halogens with LED strip. Can somebody please give me advice on install what do I need to hook up differently to make sure the LED strip works? Thanks
 

·
Registered
Joined
·
2 Posts
I used V-land assemblies from amazon. Come with harnesses to match different years of trucks.
I have had no issues.

However, I have a Platinum. I have read that not plat/1794's have issues with the housing melting from the drl operating the turn signal bulb all the time. If I were to put them on a truck which is a non plat/1794, I would probably disable the drl signal to the turn signal bulb, and just only have the white drl led's operational. That is how it is on my Plat, but plats and 1794's, maybe even limited trim* (unsure tbh) have led drl from the factory, and do not use the turn/running bulb as the drl. At least in 2017.
OK thanks I’ve got the DRL wire that hooks to the fuse and I’m gonna run the halogen with the black housing and the led drl. That sounds like a good idea to disable the bulb do you have any idea how I would go about doing that on the factory housing I think there’s three wires that go to that bulb.
 
1 - 2 of 2 Posts
Top