Toyota Tundra Discussion Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
I finally got a set of 20" xd cranks (0 offset) wrapped in some 33x12.50 Toyo Mts! I love the way it came out, but Ive noticed since i put the tires and rims on, if i nail in to it the traction control light starts to blink! If anyone knows about this please feel free to clue me in!
 

Attachments

·
Registered
Joined
·
216 Posts
Those 33's look just right! Not speaking from experience, but it sounds like you need to do the zero calibration or modify (shim/raise) the sensor under your console. I'm getting ready to level mine and read up on the traction control issue which seems somewhat common on lifted tundras. Run a search and you'll probably get plenty of results.
 

·
"A Man Needs A Maid"
Joined
·
1,277 Posts
Nannies turned off?
 
  • Like
Reactions: Ogtoyfan

·
Registered
Joined
·
507 Posts
Turn the nannies off! Flares and nannies are for sissies.
 
  • Like
Reactions: Jesco
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top