Toyota Tundra Discussion Forum banner

1 - 20 of 74 Posts

·
Registered
Joined
·
195 Posts
Discussion Starter #1
Maxtrac Suspension is proud to announce the release of our brand new 2007-2012 Tundra 2wd 3.5" Lift Spindles!!! Maxtrac Suspension has brought its proven spindle technology to the new 2WD Toyota Tundras. Our single piece cast design in ductile iron provides more stability than anything that comes stock on these beefy trucks. Proven sturdiness time and time again show that these new spindles will stand up to the toughest conditions. Give your truck the height required to fit those larger tires, with simple bolt on parts that require no cutting or welding. A pair of DOT approved brakelines are included with our spindles as well. These spindles can be used in conjuction with our 2.5" strut spacer to give your 2wd Tundra a full 6" of lift without compromising ride quality and keeping cost down. We also offer rear blocks, U-bolts, rear shocks, a carrier bearing spacer, e-brake bracket & rear brakeline extensions to make a true complete 3.5" or 6" kit with much more ground clearance than your standard drop down bracket style kit! Please contact your local Maxtrac distributor or any of our online retailers if you need pricing or would like to place an order

3.5" Spindles w/ DOT approve brakelines

3.5" Complete Kit

6" Complete Kit
 

·
Registered
Joined
·
179 Posts
Tundra 6 inch lift kit

Very interested in this kit. Looks good. Any chance of a discount for tundratalk members? Either way, thanks for being here and adding to the community.
 

·
Registered
Joined
·
189 Posts
subscribed.
 

·
Registered
Joined
·
195 Posts
Discussion Starter #4
Very interested in this kit. Looks good. Any chance of a discount for tundratalk members? Either way, thanks for being here and adding to the community.
And thank you for having us! its a pleasure! Everyone seems to be very friendly and have some really good input. As for the kits and pricing/forum member discounts, we do not sell direct so I don't have any way of controlling that. We used to be on TitanTalk and somebody set up a group buy with Jacob from Suspension Specialists. He may be willing to do something like that again. I believe they set something up where if 20 people bought our 4" titan spindles there was a huge price break. I believe the same thing was done on Tacoma world as well. So if not with him then maybe any of our other vendors on this forum would be interested in doing something like that. I would start a thread and either A) Ask if there are any vendors on here that sell Maxtrac products that would be willing to give a forum member discount. Or B) Would be they be willing to do a group buy deal. Or maybe both. Start a thread if you'd like and use the link to my post of our tundra kits and see what you get. I would be more than happy to work with any vendor that wants to do a forum member discount, special, group buy, etc. Thanks again! :thumbsup:
 

·
Registered
Joined
·
189 Posts
Wonder if anybody had this brand? Never heard of this brand but then again I'm new to the truck scene. Would love to see/read reviews on this.
 

·
Registered
Joined
·
195 Posts
Discussion Starter #6
Wonder if anybody had this brand? Never heard of this brand but then again I'm new to the truck scene. Would love to see/read reviews on this.
Well, I know this isn't so much a review on our product but here are a couple magazine install ads that we have done so you can see the product being installed and get a feel for it that way.
http://maxtracsuspension.com/wp-content/uploads/2013/02/MAGAZINE_OFFROAD_TITAN.pdf

http://maxtracsuspension.com/wp-content/uploads/2013/02/Street-Truck-Installation.pdf

Other than that i guess you could go on TitanTalk or TacomaWorld and see what those guys have to say about our product? We were on those forums for quite some time and had a lot of members with our products on their trucks and seemed to get a lot of positive feedback. So please feel free to ask around or investigate on google and in the mean time check out the magazine links. Thank you for your interest in Maxtrac Suspension!!:eek:hyeah:
 

·
Registered
Joined
·
179 Posts
Will definitely check that out. Thanks.
 

·
Registered
Joined
·
577 Posts
I'm going to so more research on these. I found the cst spindles for $850 cash out the door. But like you guys have never heard of them. I can't imagine they would be much different?


Sent from AutoGuide.com Free App
 

·
Registered
Joined
·
1,747 Posts
Was difficult to find prices but found some.
3.5 spindles - $625
6" lift - $975


Sent from my Galaxy SIII
 

·
Registered
Joined
·
577 Posts
Was difficult to find prices but found some.
3.5 spindles - $625
6" lift - $975
Wow. group buy could be even less!

MaxTrac is located like 15 min from my work. Sean gave me a number for a shop that is right next to them that I could purchase from. I'm going to give them a call tomorrow for information. Also will talk to them about the possibility of a group buy. Will keep everyone updated!
 

·
Registered
Joined
·
97 Posts
I am getting these Spindles installed tomorrow. Also Fox coil overs to get a 7" total Lift. 35x12.5.18 Nitto Mud Grapplers, Fuel Octane chrome rims. Cant wait! I will take some pics when done and post.
 

·
Registered
Joined
·
97 Posts
The CST Spindles are welded from different parts, the MaxTrac are Cast and machined. The CST spindles would be better if you were going to be doing off roading. But if your a pavement pounder like me, that tows, puts motorcycles in the bed. and wants a lifted truck then the MAxTrac are good enough. MaxTrac are about $300 cheaper. I got the full background on both today and chose the MaxTrac.

I am getting the MaxTrac Spindles, and Fox coil overs installed for a total of $1950 in Anaheim California.
 

·
Registered
Joined
·
189 Posts
I'm down for a group buy!
 

·
Registered
Joined
·
195 Posts
Discussion Starter #18
I am getting these Spindles installed tomorrow. Also Fox coil overs to get a 7" total Lift. 35x12.5.18 Nitto Mud Grapplers, Fuel Octane chrome rims. Cant wait! I will take some pics when done and post.
Can't wait to see pics of your truck done man! That's going to be a sweet setup. See if you can sneak some pics in of the install as well (if allowed). Thanks for the support!
 

·
Registered
Joined
·
577 Posts

·
Registered
Joined
·
97 Posts
Finally got her home and cleaned up today. 3.5" MaxTrac Spindles, Fox Coil Overs, Fuel Octane Chrome 18x9 (5.25 backspacing), Nitto 35" Mud Grapplers.

Im really happy with the lift, and the truck looks great. Those MaxTrac Spindles are amazing looking. Very beefy. I would recommend them.
 

Attachments

1 - 20 of 74 Posts
Top