Toyota Tundra Discussion Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hey guys newbe here. OK I have running lights on new trailer and I have verified trailer is perfect but no brake lights or turn signals. Checked all fuses and relays (under hood and at dash ) and nothing found. factory 4 prong w/converter WHATS THE CONVERTER? Any ideas?
 

·
Registered
Joined
·
8,147 Posts
Welcome to the forum. I haven't towed anything yet, so I am not much help. Some knowledgeable members should be able to help you.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #3 · (Edited)
I have checked all fuses in engine and kick panel and all ok. I traced what I believe is the wires for brake and turn that come out under my seat and they don't have power when engine is on and brake applied of turn sig on. I tested rear 4 pin plug with 12v dc tester grounded to ground on plug and running lights are on with lights on but nothing for turn or brake. Stumped. I cant locate the converter for this 05 factory wiring also.
 
1 - 5 of 5 Posts
Top