Toyota Tundra Discussion Forum banner

Leveled with 35's - post em here!

1M views 1K replies 473 participants last post by  Andrewtundra5.7 
#1 ·
I got my LRO kit waiting to be installed. I want to run 35's, but now I am debating if I should do 4" lift. Post your pics to help me decide! Thanks!
 
#1,342 ·
Front 6112 with 2driver and 1 passender shims
Back 5100 with 1.5 shackles
20x9 -12 offset
LT295/65R20
 

Attachments

#1,347 ·
#1,348 ·
I can't help with the trimming question but I can answer the fuel mileage question. You will gain between 10 and 15 lbs a tire in going up that 1 inch. You are going to lose some fuel economy just turning the extra weight, now factor in the increased rolling resistance of the wider tire, you will notice the difference in economy.

Sent from my SM-G960U using Tapatalk
 
#1,349 ·
So you think 1 to 1.5 or so? I have the 4.6
 
#1,355 ·
Hey guys I could really use some help here, I’m driving myself crazy! Here’s my setup: 2014 Crewmax SR5 TRD 3/2 Readylift Leveling Kit Fuel 20x9 with +20 offset
I currently have 295/60/20 Nitto Trail Grapplers and they basically shredded the passenger side front plastic liner behind the bumper (mostly at full lock) I’m looking to fill up some of the open space in the wheel well and I don’t want to do any other mods or chopping. Any tire size suggestions? Please help!
 
#1,359 ·
Just in case anyone wanted to see what 35's look like on a OME 612 lift, CB Shims. 30+ 20" XD rims. NO rub.
More details in Signature.

YB


Land vehicle Vehicle Car Tire Automotive tire
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top