RBP wheels - Need some quick feedback - want to order - TundraTalk.net

Bullseye08 · 09-10-2008, 08:48 PM

OK I think I found some wheels for my truck and I need you guys feedback so I can pull the trigger tomorrow and get them on order. $1299.00

Here is the deal.

RBP92R in all black 20X9 with a "zero" offset. Minimum 6" lift required.

What do you guys think of this wheel? Will I have any issues? They are 5 on 150MM, in stock and ready to roll. Will they stick out alot? Are these quality wheels?

I think they will look good, I really wanted the 91R but I can't find any....

Here they are;

If I am going 6" I want this truck to look killer so I hope these are the answer...

SRT8TUNDRA · 09-10-2008, 09:07 PM

Nice wheels but I don't like 20's with a 6" lift. JMO

Bullseye08 · 09-10-2008, 09:44 PM

slight change after talking to the dealer.

The new 91R is coming out in 6 weeks and it has a +25 offset and 4.5" back spacing in a 20X10. I like that wheel better and that is what I will probably end up with.

4x4Balls · 09-11-2008, 03:45 AM

do you have a pic of the new 91r?

SRT8TUNDRA · 09-11-2008, 09:15 AM

Quote:

Originally Posted by 4x4Balls

do you have a pic of the new 91r?

RuffnTuff · 09-11-2008, 11:03 AM

Those are sick!

SybErkRimInAL · 09-11-2008, 04:08 PM

Someone here has those wheels. They had them custom drilled to fit. Are you saying they're gonna start offering their wheels in our 5x150??

SRT8TUNDRA · 09-11-2008, 04:11 PM

Quote:

Originally Posted by SybErkRimInAL

Someone here has those wheels. They had them custom drilled to fit. Are you saying they're gonna start offering their wheels in our 5x150??

spikeydude has them

Bullseye08 · 09-11-2008, 09:35 PM

Quote:

Originally Posted by SybErkRimInAL

Someone here has those wheels. They had them custom drilled to fit. Are you saying they're gonna start offering their wheels in our 5x150??

Thats what they told me. They have a set of the 92R in stock in 5X150 ready to go but I didn't like the offset and I want the 91R's.

I can't freakin wait....

Bocephus · 09-11-2008, 09:52 PM

i highly doubt they will have a nice "deep dish" look like that. it just isnt hardly possible with how the tundra is set up. only way is if they will stick out a half foot from the fender lol.

Bullseye08 · 09-11-2008, 11:29 PM

Quote:

Originally Posted by Bocephus

i highly doubt they will have a nice "deep dish" look like that. it just isnt hardly possible with how the tundra is set up. only way is if they will stick out a half foot from the fender lol.

Of course not, that goes without saying........um, well, it did anyway until you said it

They will still look sweet.

4x4Balls · 09-12-2008, 02:33 AM

Quote:

Originally Posted by SRT8TUNDRA

thats not the new one. thats the same old 91r.

Sorry, this is not a winning ticket, Please play again.

4x4Balls · 09-12-2008, 02:35 AM

Quote:

Originally Posted by Bocephus

i highly doubt they will have a nice "deep dish" look like that. it just isnt hardly possible with how the tundra is set up. only way is if they will stick out a half foot from the fender lol.

they do stick out, and they are very very very sick.

these are my dreams wheels. im just not too hot about having them drilled after they are powedercoated.

if i had the option of having them custom made i would, but after repeated attempts to contact the company, they are refusing. they keep offering me the 92,93,94.

eventually im gonna hunt down spikey dude and just steal his truck.

Bocephus · 09-12-2008, 09:20 AM

they are nice wheels, but they stick out too far. i dont even like the way it looks. in alot of states, that is even illegal.

Bullseye08 · 09-12-2008, 11:29 AM

Quote:

Originally Posted by Bocephus

they are nice wheels, but they stick out too far. i dont even like the way it looks. in alot of states, that is even illegal.

You didn't see what I wrote earlier when I said they are going to make the 91R in a +25 offset which is most likely very close to what your wheels are. I don't want them sticking way out at all......

If they are illegal there are lots of people in MO driving around in illegal trucks and not getting any trouble about it.

09-10-2008, 08:48 PM	#1 (permalink)
Bullseye08 Senior Member Join Date: Jul 2008 Location: Missouri Posts: 219	RBP wheels - Need some quick feedback - want to order OK I think I found some wheels for my truck and I need you guys feedback so I can pull the trigger tomorrow and get them on order. $1299.00 Here is the deal. RBP92R in all black 20X9 with a "zero" offset. Minimum 6" lift required. What do you guys think of this wheel? Will I have any issues? They are 5 on 150MM, in stock and ready to roll. Will they stick out alot? Are these quality wheels? I think they will look good, I really wanted the 91R but I can't find any.... Here they are; If I am going 6" I want this truck to look killer so I hope these are the answer... __________________ 08' White on Red Rock Crewmax Limited 4X4 -Tint -NFAB steps -TRD shift knob -Borla Exhaust -Truxx 3/1" -Alcoa 20X9 Adventurers -305/55/20 BFG AT KO's -WeatherTech floor liners -WeatherTech Lic. Pl Frames

09-10-2008, 09:07 PM	#2 (permalink)
SRT8TUNDRA Senior Member Join Date: May 2008 Location: South Florida Posts: 4,753	Nice wheels but I don't like 20's with a 6" lift. JMO __________________ www.IBTOHQ.com

09-10-2008, 09:44 PM	#3 (permalink)
Bullseye08 Senior Member Join Date: Jul 2008 Location: Missouri Posts: 219	slight change after talking to the dealer. The new 91R is coming out in 6 weeks and it has a +25 offset and 4.5" back spacing in a 20X10. I like that wheel better and that is what I will probably end up with. __________________ 08' White on Red Rock Crewmax Limited 4X4 -Tint -NFAB steps -TRD shift knob -Borla Exhaust -Truxx 3/1" -Alcoa 20X9 Adventurers -305/55/20 BFG AT KO's -WeatherTech floor liners -WeatherTech Lic. Pl Frames

09-11-2008, 11:03 AM	#6 (permalink)
RuffnTuff Senior Member Join Date: Aug 2008 Location: Columbia, SC Posts: 400	Those are sick! __________________ CLICK PICTURE BELOW New Truck: 08 DC 5.7 Limited 4x4 (09/30/08) Mods: 20" BBS with 275/60/20 tires Chrome step rails Gray painted pin stripes Fender flares OEM Alarm Deck Railing System OEM back up cam Borla Dual exhaust Line-X Volant CAI w/Powercore filter Wade Vent Visors G-Tek Protectors Upcoming Mods: Have enough Old Truck: 08 Silver Sky Metallic 5.7L DC TRD (New 7/31/08)(Totaled 9/12/08)

09-11-2008, 04:08 PM	#7 (permalink)
SybErkRimInAL Senior Member Join Date: Aug 2007 Location: Palm Springs, CA Posts: 1,917	Someone here has those wheels. They had them custom drilled to fit. Are you saying they're gonna start offering their wheels in our 5x150?? __________________ Black 08 CM Post purchase Mods/Upgrades (click on item to view pic) AFE CAI Borla Dual Catback Projection Halo Headlights

Remove Advertisements Sponsored Links
TundraTalk.net - Toyota Tundra Discussion Forum Advertisement

09-11-2008, 03:45 AM	#4 (permalink)
4x4Balls Senior Member Join Date: Apr 2008 Posts: 1,969	do you have a pic of the new 91r?

09-11-2008, 09:52 PM	#10 (permalink)
Bocephus Senior Member Join Date: Jun 2008 Location: out in the boonies Posts: 595	i highly doubt they will have a nice "deep dish" look like that. it just isnt hardly possible with how the tundra is set up. only way is if they will stick out a half foot from the fender lol. __________________ 2008 DC, 4x4, TRD 5.7L * 2.4 Ready-Lift, Airaid intake, Lorado tonneau cover * 305/55/20 Mickey Thompson Baja ATZ's on 20'' Ultra Goliath's and 285/65/18 BFG AT's on stock TRD rims * grille surround, door handles, and tailgate handle painted to match body, black headlight mod * Alpine CDA-9857, Kicker KX600.1, Rockford 450.4, Kicker Resolution 6.5'' components front and rear, Kicker 12'' L7

09-12-2008, 09:20 AM	#14 (permalink)
Bocephus Senior Member Join Date: Jun 2008 Location: out in the boonies Posts: 595	they are nice wheels, but they stick out too far. i dont even like the way it looks. in alot of states, that is even illegal. __________________ 2008 DC, 4x4, TRD 5.7L * 2.4 Ready-Lift, Airaid intake, Lorado tonneau cover * 305/55/20 Mickey Thompson Baja ATZ's on 20'' Ultra Goliath's and 285/65/18 BFG AT's on stock TRD rims * grille surround, door handles, and tailgate handle painted to match body, black headlight mod * Alpine CDA-9857, Kicker KX600.1, Rockford 450.4, Kicker Resolution 6.5'' components front and rear, Kicker 12'' L7

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search