Anyone go with nitto terra grapplers? - Page 2 - TundraTalk.net

mel1310 · 05-05-2008, 03:24 PM

they are wider, i just dont remember how much wider they are. so that is why they rub

ProCharger · 05-05-2008, 09:46 PM

Stock on the 18's are 275/65/18, should measure a hair over 32 inches tall (32.1). A 275mm wide tire is roughly 11 inches wide, if I were a betting man and those are 33's on that truck as well as 18's chances are they are a 33x12.5x18.

EDIT: Had to correct myself, no way a 33x12.5 is going to mount on the stock wheels. That would require a 9 inch wheel min. Can I change my bet to either a 275/65/18 or a 285/60/18

MJScore · 05-07-2008, 12:23 AM

My tires are 285/65-18's. They don't make much more noise than the stock tires did. I'm going to run 35's when these wear out though. I just like a bigger looking tire. I just couldn't pass up the deal I got on these tires.

kit · 06-12-2008, 03:36 AM

Hey MJscore nice setup man. Those nitto's look clean on the truck. Do you have a leveling kit on it or stock?

DSLKSL · 06-12-2008, 09:03 AM

like this one?

bigk23surf · 06-16-2008, 11:12 AM

Quote:

Originally Posted by DSLKSL

like this one?

What size are those? Also what rims and rims sizes? What leveling kit do you have? I like that alot, might be what I go with.

SRT8TUNDRA · 06-16-2008, 11:36 AM

I have them too!

DSLKSL · 06-16-2008, 10:24 PM

18" x 9 " wheels Truxxx 3" level with the 1" in the rear and 325/60R/18

kit · 06-17-2008, 01:40 AM

Those are clean Tundra's.

05-05-2008, 03:24 PM	#16 (permalink)
mel1310 Senior Member Join Date: Oct 2007 Location: Lake County, Florida Posts: 128	they are wider, i just dont remember how much wider they are. so that is why they rub __________________ 2007 Black 5.7L 4x4 SR5 CrewMax Airaid Cold Air Intake, Magnaflow Dual Exhaust with 4" tips, Line-X Spray in Bed Liner, 2.5" Leveling Kit, Tint, Westin Step Bars, 60" Plasmaglow Fire and Ice LED Brakelight Bar, 18" KMC XD Hoss Chrome Wheels, 33" Nitto Terra Grappler Tires So Far.....

05-05-2008, 09:46 PM	#17 (permalink)
ProCharger Member Join Date: Apr 2008 Location: St. Louis Posts: 42	Stock on the 18's are 275/65/18, should measure a hair over 32 inches tall (32.1). A 275mm wide tire is roughly 11 inches wide, if I were a betting man and those are 33's on that truck as well as 18's chances are they are a 33x12.5x18. EDIT: Had to correct myself, no way a 33x12.5 is going to mount on the stock wheels. That would require a 9 inch wheel min. Can I change my bet to either a 275/65/18 or a 285/60/18 __________________ 07 DC Limited 4x4 TRD Tundra 00 S-10 Xtreme Race Truck Last edited by ProCharger : 05-05-2008 at 09:52 PM.

06-16-2008, 11:36 AM	#22 (permalink)
SRT8TUNDRA Senior Member Join Date: May 2008 Posts: 364	I have them too! __________________ 2007 TUNDRA DC SAP 3 INCH DAYSTAR LIFT 18X9 AR VICE WHEELS 325X60X18 NITTO TERRA GRAPPLERS TRD SHIFTER CHROME HANDLES MAGNAFLOW BLACKED OUT TOYOTA GRILLE BADGE LOCKING GAS CAP CHARCOAL FILTER MOD WWW.YOUTUBE.COM/SRT8TUNDRA

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Remove Advertisements Sponsored Links
TundraTalk.net - Toyota Tundra Discussion Forum Advertisement

05-07-2008, 12:23 AM	#18 (permalink)
MJScore Junior Member Join Date: May 2007 Location: Manteca, CA Posts: 9	My tires are 285/65-18's. They don't make much more noise than the stock tires did. I'm going to run 35's when these wear out though. I just like a bigger looking tire. I just couldn't pass up the deal I got on these tires.

06-12-2008, 03:36 AM	#19 (permalink)
kit Senior Member Join Date: Mar 2008 Location: Inland Empire Posts: 189	Hey MJscore nice setup man. Those nitto's look clean on the truck. Do you have a leveling kit on it or stock?

06-16-2008, 10:24 PM	#23 (permalink)
DSLKSL Member Join Date: Jul 2007 Posts: 49	18" x 9 " wheels Truxxx 3" level with the 1" in the rear and 325/60R/18

06-17-2008, 01:40 AM	#24 (permalink)
kit Senior Member Join Date: Mar 2008 Location: Inland Empire Posts: 189	Those are clean Tundra's.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)