Built a 07 CM SUB enclosure today - TundraTalk.net

tech12volt · 12-20-2007, 11:34 PM

I ended up with 1.5 cu foot total. Its is divided and fibegrlass rsined internally. Uou have to move the seat about 2 nothces with this enclosure and you can still recline the seat. I could build it much deeper but this customer does not want to much the seat much at all. We will be running either Boston g1 10s or Sundown Audio sd1v2s.I could do g1 12s in this same enclosure as well with a little polyfill.

All the corners on the enclosure are rounded . I will be wrapping this enclosure with Vinyl tomorrow. The Toyota logo should real nice under Black Vinyl.here are some pics.

bolivia310 · 12-21-2007, 01:26 AM

Sweet man cant wait to see the finished product!!

rmjdrift · 12-21-2007, 01:48 AM

very nice work bro, as stated above, can't wait to see it all done. remember to take more pics

tech12volt · 12-21-2007, 12:49 PM

Here are some finished Pics. It looks sweet. I must say. And takes away no functions of the seat.If any of you have any questions about this feel free to email me at Tech12volts.com

CLToy · 12-22-2007, 01:00 AM

The only thing I need is a 10 or 12 slim sub behind driver rear with a space for an amp rack...seems simple enough?

tech12volt · 12-22-2007, 01:13 AM

Quote:

Originally Posted by CLToy

The only thing I need is a 10 or 12 slim sub behind driver rear with a space for an amp rack...seems simple enough?

Absolutely. Check out my website. think you will find thats not a problem.

Tech12volts.com

FRITHATISH · 12-22-2007, 10:47 PM

that looks awsome i have been lookng for an inclosure im not shure about the specs but i would be interested about how much would it set me back?

tech12volt · 12-23-2007, 08:59 PM

Quote:

Originally Posted by FRITHATISH

that looks awsome i have been lookng for an inclosure im not shure about the specs but i would be interested about how much would it set me back?

with carpet I think 179.99
with vinyl Iwould say 225.00

rmjdrift · 12-24-2007, 07:49 PM

Tech the finished product is very nnice, I am looking to do a 10" don't want to lose all my storage space, have you done that yet?

tech12volt · 12-25-2007, 02:07 PM

A single 10 would be no problem. just cut the box in hald basically.

CLToy · 12-25-2007, 05:31 PM

Quote:

Originally Posted by tech12volt

A single 10 would be no problem. just cut the box in hald basically.

True, but you mentioned that the seat would have to come forward 2 notches. Was this box for a slimline sub or reg depth 10"? I am looking for a setup where I do not loose any leg room...possible?

Merry Christmas!

tech12volt · 12-25-2007, 11:00 PM

The Boston g1 10s is a regular 10 and is plenty loud. you would loss little to no leg room

rmjdrift · 12-25-2007, 11:16 PM

My application would be on a Double CAb, not a Crew

tech12volt · 12-27-2007, 12:32 AM

Quote:

Originally Posted by rmjdrift

My application would be on a Double CAb, not a Crew

Iwould have to measureone but it doesnt seem to hard .

john nun · 01-19-2008, 04:00 PM

what would be the measurements of that box you built for the crew max? I got 3" top , 5" bottom
14" high, 36" wide , .79 cuft air space , could make it 45" wide

tech12volt · 01-19-2008, 05:34 PM

Quote:

Originally Posted by john nun

what would be the measurements of that box you built for the crew max? I got 3" top , 5" bottom
14" high, 36" wide , .79 cuft air space , could make it 45" wide

nope i mad it 20 inches tall and 42 inches wide.

CLToy · 04-07-2008, 04:05 PM

tech12volt,
I have a headunit on the way and the new JL 13TW5's are shipping now. The current plan from JL on their stealthbox design is to use 2 without any room for amp mounting and to lose 2 notches on slider. This is unacceptable. I am willing to cut the back cover, add deadening material to the back wall and slide a box (potentially made by you) to get an additional 2 inches. I am looking for either a 1 sub setup or 2 sub setup with 3 conditions...
1) I have to not loose any leg room or seat functionality
2) I would like to be able to mount my chrome PPI PC1800 and PC4400 either beside or above for show
3) I would like to not lose access to the spare tire jack panel located on the Pass side.

Do you think that this is do-able? The sub needs 0.6 cubic feet per sub and has a mounting depth of only 2.54 inches. Check out the specs and see what you can do for me.

JL Audio Products: Subwoofers / 13TW5

Thanks!
Chadrick

tech12volt · 04-09-2008, 01:36 AM

Quote:

Originally Posted by CLToy

tech12volt,
I have a headunit on the way and the new JL 13TW5's are shipping now. The current plan from JL on their stealthbox design is to use 2 without any room for amp mounting and to lose 2 notches on slider. This is unacceptable. I am willing to cut the back cover, add deadening material to the back wall and slide a box (potentially made by you) to get an additional 2 inches. I am looking for either a 1 sub setup or 2 sub setup with 3 conditions...
1) I have to not loose any leg room or seat functionality
2) I would like to be able to mount my chrome PPI PC1800 and PC4400 either beside or above for show
3) I would like to not lose access to the spare tire jack panel located on the Pass side.

Do you think that this is do-able? The sub needs 0.6 cubic feet per sub and has a mounting depth of only 2.54 inches. Check out the specs and see what you can do for me.

JL Audio Products: Subwoofers / 13TW5

Thanks!
Chadrick

Yes this doable with no problems. With 2.5 inches of mounting depth.

CLToy · 05-04-2008, 10:36 PM

Quote:

Originally Posted by tech12volt

Yes this doable with no problems. With 2.5 inches of mounting depth.

PM sent...

CLToy · 05-12-2008, 07:33 PM

Quote:

Originally Posted by tech12volt

Yes this doable with no problems. With 2.5 inches of mounting depth.

PM Sent...

12-21-2007, 01:48 AM	#3 (permalink)
rmjdrift Supporting Vendor Join Date: Jul 2007 Location: Ventura, Ca Posts: 868 My Photos: ()	very nice work bro, as stated above, can't wait to see it all done. remember to take more pics __________________ 2007 Toyota Tundra 5.7 Slate, Double Cab 1987 Mazda RX-7 Turbo II 1989 Nissan 240sx Pro Drift Spec (the HATCH) - FOR SALE - 1991 Nissan 240sx Pro Drift Spec (the COUPE) www.RMJMOTORSPORTS.com

12-22-2007, 01:00 AM	#5 (permalink)
CLToy Junior Member Join Date: Dec 2007 Location: Charleston, WV Posts: 28 My Photos: ()	The only thing I need is a 10 or 12 slim sub behind driver rear with a space for an amp rack...seems simple enough? __________________ Chadrick http://www.chadrick.net 1982 Toyota Supra (Recently restored!) 2007 Toyota Tundra 5.7L CrewMax 4x4 Current Tundra Mods: GuardX wax, Westin Chrome BullBar & SideSteps, Rhino Spray Liner, BakFlip G2 Tonneau Cover with custom drain tubes, JLAudio TR65Cxi and JLAudio VR650Csi, Tinted windows, Volant Cold-Air Intake, Zoomers Cat-Back Exhaust, TopGun 2.25” Suspension Leveling kit, Kenwood DNX8120 with other audio system updates pending

12-22-2007, 10:47 PM	#7 (permalink)
FRITHATISH Member Join Date: Sep 2007 Location: San Jose Ca "The Bay" Posts: 33 My Photos: ()	that looks awsome i have been lookng for an inclosure im not shure about the specs but i would be interested about how much would it set me back? __________________ 5.7 CREW MAX SILVER SOOO FAR TINTED WINDOWS AND WINDSHEILD, GLASS PACK EXAUST MADE BY BORLA

12-24-2007, 07:49 PM	#9 (permalink)
rmjdrift Supporting Vendor Join Date: Jul 2007 Location: Ventura, Ca Posts: 868 My Photos: ()	Tech the finished product is very nnice, I am looking to do a 10" don't want to lose all my storage space, have you done that yet? __________________ 2007 Toyota Tundra 5.7 Slate, Double Cab 1987 Mazda RX-7 Turbo II 1989 Nissan 240sx Pro Drift Spec (the HATCH) - FOR SALE - 1991 Nissan 240sx Pro Drift Spec (the COUPE) www.RMJMOTORSPORTS.com

12-25-2007, 11:16 PM	#13 (permalink)
rmjdrift Supporting Vendor Join Date: Jul 2007 Location: Ventura, Ca Posts: 868 My Photos: ()	My application would be on a Double CAb, not a Crew __________________ 2007 Toyota Tundra 5.7 Slate, Double Cab 1987 Mazda RX-7 Turbo II 1989 Nissan 240sx Pro Drift Spec (the HATCH) - FOR SALE - 1991 Nissan 240sx Pro Drift Spec (the COUPE) www.RMJMOTORSPORTS.com

Remove Advertisements Sponsored Links
TundraTalk.net - Toyota Tundra Discussion Forum Advertisement

12-21-2007, 01:26 AM	#2 (permalink)
bolivia310 Member Join Date: Sep 2007 Posts: 95 My Photos: ()	Sweet man cant wait to see the finished product!!

12-25-2007, 02:07 PM	#10 (permalink)
tech12volt Junior Member Join Date: Mar 2007 Posts: 17 My Photos: ()	A single 10 would be no problem. just cut the box in hald basically.

12-25-2007, 11:00 PM	#12 (permalink)
tech12volt Junior Member Join Date: Mar 2007 Posts: 17 My Photos: ()	The Boston g1 10s is a regular 10 and is plenty loud. you would loss little to no leg room

01-19-2008, 04:00 PM	#15 (permalink)
john nun Junior Member Join Date: Jan 2008 Posts: 1 My Photos: ()	what would be the measurements of that box you built for the crew max? I got 3" top , 5" bottom 14" high, 36" wide , .79 cuft air space , could make it 45" wide

04-07-2008, 04:05 PM	#17 (permalink)
CLToy Junior Member Join Date: Dec 2007 Location: Charleston, WV Posts: 28 My Photos: ()	tech12volt, I have a headunit on the way and the new JL 13TW5's are shipping now. The current plan from JL on their stealthbox design is to use 2 without any room for amp mounting and to lose 2 notches on slider. This is unacceptable. I am willing to cut the back cover, add deadening material to the back wall and slide a box (potentially made by you) to get an additional 2 inches. I am looking for either a 1 sub setup or 2 sub setup with 3 conditions... 1) I have to not loose any leg room or seat functionality 2) I would like to be able to mount my chrome PPI PC1800 and PC4400 either beside or above for show 3) I would like to not lose access to the spare tire jack panel located on the Pass side. Do you think that this is do-able? The sub needs 0.6 cubic feet per sub and has a mounting depth of only 2.54 inches. Check out the specs and see what you can do for me. JL Audio Products: Subwoofers / 13TW5 Thanks! Chadrick __________________ Chadrick http://www.chadrick.net 1982 Toyota Supra (Recently restored!) 2007 Toyota Tundra 5.7L CrewMax 4x4 Current Tundra Mods: GuardX wax, Westin Chrome BullBar & SideSteps, Rhino Spray Liner, BakFlip G2 Tonneau Cover with custom drain tubes, JLAudio TR65Cxi and JLAudio VR650Csi, Tinted windows, Volant Cold-Air Intake, Zoomers Cat-Back Exhaust, TopGun 2.25” Suspension Leveling kit, Kenwood DNX8120 with other audio system updates pending

Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)
wildbill129

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search