Need Help with an installation issue of an Eclipse AVN-6610 in 07 Tundra

[italo2000]

I got professional installer that put the Eclipse Nav 6610, ipod adapter, rear view camera in my new Tundra, everything works perfect except the unit doesn't read out speed of the vehicle under the Info Setting and couple of the things flash in my dash (like Check Engine, VSC and 4Lo). I believe he tap right speed sensor wire in back of the small glove compartment (white wire in 3rd pin) but maybe that is not the right wire. If anybody has install this unit in a 07 tundra that provide feedback so I can resolve this problem would be greatly appreciated. Thanks

07 Tundra SR5 Crewmax TRD Package.

[DSLKSL]

It is a very thin white wire behind the radio. It is in a plug for a factoy nav unit.

[italo2000]

DSLKSL,

Thanks for the information, its amazing how one little wire can cause so much hasle. Everything works perfect now and I'm enjoying my new eclipse unit.

Thanks Again.

[DSLKSL]

So I take it you found the wire?

[italo2000]

DSLKSL,

Yes I did, I cut that white wire from the plastic plug and connected the speed sensor wire from the eclipse unit directly to that white wire. That solve all my problems and the unit is working perfect now.

Thanks Again...