![]() |
![]() |
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread |
|
|
#1 (permalink) |
|
Member
Join Date: Aug 2007
Posts: 63
|
Navigation Setup Question???
I can't find the wires for the speed sensor or the reverse light wires in the cab. Can anyone help to tell me where I should look and what color wires they are? I have a 2007 crewmax. Any help would be appreciated!
|
|
|
|
| Sponsored Links | |
Advertisement |
|
|
|
#2 (permalink) |
|
Member
Join Date: Aug 2007
Location: Gulfport, MS
Posts: 64
|
I will be installing XM in a few days, so I will have my NAV unit out. If you can tell me where you have to hook them to the unit, I might be able to give you the color. This is assuming you are putting in a factory system.
__________________
2007 Tundra D/C Ltd 4wd 2005 Tundra D/C SR5 2wd 2004 Sequoia SR5 2wd |
|
|
|
|
|
#6 (permalink) |
|
Member
Join Date: Aug 2007
Posts: 63
|
OK .......I found one wire and it's for the speed sensor. It may be different on others but if your vehicles have the stock radio that gets louder as you drive faster then the wire is behind the stock radio. After getting the aftermarket adapters and plugging them in I had three that went into the stock radio and only two used for the aftermarket adapters. The one not used has a single white wire and that is the speed sensor. Still can't find the reverse color wire and where it's located.
|
|
|
|
![]() |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|