![]() |
![]() |
|
|||||||
![]() |
|
|
LinkBack | Thread Tools | Search this Thread |
|
|
#2 (permalink) | |
|
Senior Member
Join Date: Aug 2007
Location: Palm Springs, CA
Posts: 1,211
|
Quote:
1. remove screws from door handle. One is located under the felt piece of fabric in the arm rest. The other is behind the black plastic cap behind the actual door handle that you open to release the door. Once those two screws are out, just start popping out the door panel from the bottom up. There is a black plastic clip close to where the mirror goes that will be difficult to pop out. Take a small phillups and push in the center of the clip and it should release easily. 2. Once all the clips are out, just let the door panel hang there, it'll be okay, no need to disconnect all the wires. 3. remove that small triangular piece of plastic right where the mirror goes. 4. using a 10mm socket, or nut driver, remove the 3 nuts that hold the mirror in place. Be very careful not to drop the nuts into the door. 5. there is a small plastic clip that holds the mirror in place once you remove the nuts. I'm not sure how exactly to take this out so you can re use it, so I just broke it off. It's only there in case the 3 nuts somehow become loose and will hold your mirror in place if this happens. I dont see how in the world that scenario would ever happen. 6. disconnect the wire harness for your mirrors, pop in your new mirrors, connect them then reverse the process. Vua' la. I was done in less than 30 minutes doing it myself.
__________________
Black 08 CM Post purchase Mods/Upgrades (click on item to view pic) 4-piece Billet Grille AFE CAI Borla Dual Catback Projection Halo Headlights |
|
|
|
|
|
|
#7 (permalink) |
|
Senior Member
Join Date: Aug 2007
Location: Palm Springs, CA
Posts: 1,211
|
It turns on automatically when you put on the defrost.
__________________
Black 08 CM Post purchase Mods/Upgrades (click on item to view pic) 4-piece Billet Grille AFE CAI Borla Dual Catback Projection Halo Headlights |
|
|
|
|
|
#10 (permalink) |
|
Senior Member
Join Date: Jan 2008
Location: Huntington,Indiana
Posts: 3,219
|
Can take some pics of the install when you do it ?
Thanks , Bill
__________________
![]() 2008 Crewmax X-SP carbon Fiber Dash kit 20" JTI Rims BFG AT KO 285/55/20 AFE C.A.I w/ Dry Pro filter and the AFE Mod Blacked out Headlight Mod. Flo~Pro muffler #744 Toytec 3" front , 1" rear blocks and Diff. lowering kit
|
|
|
|
|
|
#11 (permalink) |
|
Senior Member
Join Date: Mar 2008
Posts: 1,685
|
well shit i took my standard off last night .. when my tow mirrors come in friday, ill take some pics of installing and de-installing them for you!
__________________
White CrewMax 5.7L <---- Thats All That Matters ![]() lift + tires + wheels + stereo + go fast mods + tint + tinted tail lights (you're jealous) |
|
|
|
|
|
#12 (permalink) |
|
Senior Member
Join Date: Jan 2008
Location: Huntington,Indiana
Posts: 3,219
|
LOL , thanks I can't wiat to see the De-installing pics !
__________________
![]() 2008 Crewmax X-SP carbon Fiber Dash kit 20" JTI Rims BFG AT KO 285/55/20 AFE C.A.I w/ Dry Pro filter and the AFE Mod Blacked out Headlight Mod. Flo~Pro muffler #744 Toytec 3" front , 1" rear blocks and Diff. lowering kit
|
|
|
|
|
|
#13 (permalink) |
|
Senior Member
Join Date: Mar 2008
Posts: 1,685
|
its the easiest de-install .. ill have them up by the weekend.
__________________
White CrewMax 5.7L <---- Thats All That Matters ![]() lift + tires + wheels + stereo + go fast mods + tint + tinted tail lights (you're jealous) |
|
|
|
|
|
#14 (permalink) |
|
Senior Member
Join Date: Jan 2008
Location: Huntington,Indiana
Posts: 3,219
|
Look forward to seeing the pics , sir !
__________________
![]() 2008 Crewmax X-SP carbon Fiber Dash kit 20" JTI Rims BFG AT KO 285/55/20 AFE C.A.I w/ Dry Pro filter and the AFE Mod Blacked out Headlight Mod. Flo~Pro muffler #744 Toytec 3" front , 1" rear blocks and Diff. lowering kit
|
|
|
|
![]() |
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|