|
|
|
|
|||||||
 |
|
|
LinkBack | Thread Tools | Search this Thread |
05-08-2008, 12:19 AM
|
#1 (permalink) |
|
Junior Member
Join Date: Oct 2007
Location: Edmonton, Alberta, Canada
Posts: 17
|
I lost the roof trim the other day
Have any of you had this? I have an '07 double cab 5.7L 4x4 and I was getting on to the freeway when I noticed somethign flapping in the wind. Turns out the black rubber trim that sits in the channel along the roof above the driver's door was loose.
It was kind of a lousy day so I put it in the back of the truck and I'll deal with it when I go to the dealer for my next oil change. |
|
|
| Sponsored Links | |
Advertisement |
|
|
05-08-2008, 12:21 AM
|
#2 (permalink) |
|
Senior Member
Join Date: Jan 2008
Location: Huntington,Indiana
Posts: 4,015
|
I read on a thread here someone had that happen when they were going through the blowers at a car wash . They took it to the dealer and the replaced and glued it down .
__________________
 2008 Crewmax X-SP carbon Fiber Dash kit 20" JTI Rims BFG AT KO 285/55/20 AFE C.A.I w/ Dry Pro filter and the AFE Mod Blacked out Headlight Mod. Flo~Pro muffler #744 Toytec 3" front , 1" rear blocks and Diff. lowering kit 
|
|
|
|
|
05-18-2008, 01:17 PM
|
#4 (permalink) |
|
Member
Join Date: Feb 2008
Posts: 75
|
I haven't lost mine but I've noticed it's kind of loose...think I can just get some trim glue from Autozone and take care of it pre-emptively?
__________________
Matt 2008 DC 4x2 5.7L || Salsa Red Pearl || Craven Bullett Antenna || Authentic Street Thug "Keyed" Graphics Package |
|
|
|
|
05-18-2008, 01:58 PM
|
#5 (permalink) |
|
Senior Member
Join Date: Mar 2008
Location: DFW, TX
Posts: 326
|
The service manager at my local dealer says he has to replace several of them every month. Everything from car washes to high winds seem to blow these things off the trucks. I tucked ours down with a little silicone adhesive just for peace of mind.
|
|
|
|
|
05-18-2008, 11:00 PM
|
#6 (permalink) |
|
Senior Member
Join Date: Feb 2008
Location: L.A California
Posts: 4,355
|
I think I might just have to break out the marine goop, lift the ends and resecure em after hearing this.
__________________
 07 Slate DC / 12" custom lift WWW.CUSTOMMOTORSPORTS.COM 37" Toyo Open Country's 20" (Black) KMC XD Monster's N-Fab nerfsteps WWW.N-Fab.com N-Fab light bar (4) 9" ProComp quarts halogens  Banks Monster Exhaust www.Bankspower.com 
|
|
|
|
|
05-18-2008, 11:13 PM
|
#7 (permalink) |
|
Member
Join Date: Jan 2008
Location: Boise Idaho
Posts: 32
|
Been there with the roof strips. Mine were replaced by the dealer twice...then the third time the dealer found there were some differences on the manufacturing of these items. The last ones were replaced last month and have been thru the Car wash a couple of times. There was some issue with part numbers and width of the strips. Seems to be ok now. I also was told they are using Marine Goop on the bottom surface as additional insurance.
|
|
|
|
| Sponsored Links | |
Advertisement |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
