This system in aluminized steel is $379 And its $479 in stainless steel. Prices are +shipping. Testing is complete and this system is great for anyone whom wants an aggressive exhaust system that has little to no drone on the highway. This system is simple to install and sounds great thru most of the rpm band (except for the small area of rasp right at about 2500-3000 rpm).
The system is available in 2 versions: Dumped before rear axle, or it can tie to the stock tailpipe. Prices quoted above are good for either system. Either way there is a Helmholtz resonator included with the system. Tying back into the stock tailpipe has the least amount of drone.
Also, a Hypertech Interceptor compliments this system and package pricing is available.
Haha. I don't see it as bashing. I see it as an opportunity to inform potential customers.
The $350 covers:
Setting up the jig
R&D
Welding supplies
A 3000sf badass shop
Labor to put together the system
Labor to prep and paint
A helmholtz resonator for the tailpipe
Clamps to make helmholtz bolt on
Rear gasket
Packaging and shipping
Literally the whole shabang shipped to your door and you bolt it to the truck. This competes with exhaust shop pricing yet is fully reversible, no hacking into the exhaust of your $40K truck
Every weld is performed to a welding procedure specification consistently, every single time.
While this system is not for everyone, some guys don't mind taking their truck to a shop and cutting up their exhaust. You can do basically the same thing for cheaper, but if you're looking for BAmuffler quality on the cheap, this is for you.
After hearing and seeing reviews of everything dirtydeeds has done with his exhausted, I don't doubt for a single minute he's offering a cost effective alternative to one of the most efficient and quality exhaust systems for these trucks. If you are a poor bastard like me looking to milk every dime out of a tight budget and get something of quality...this would probably be the way to go. An I haven't even heard this thing yet!! Edge of my seat sir. I'm sure it's gonna be good stuff.
so this is still in the prototype stages. I will have sound clips and install pics tomorrow. It's the same great system with helmholtz resonator in the tailpipe, but it's really loud the price point is $350 shipped to the lower 48:lol5:
I can make it dump before the axle by adding a turn down:lol5: That would be evil:lol5: But I manufacture a flange at the rear of the system which will tie into the stock tailpipe. Also included, but not in the picture, is a helmholtz resonator for the stock tailpipe to kill drone.
this will not affect a smog check in any way, it is after the cats.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Toyota Tundra Discussion Forum
2.2M posts
161.2K members
Since 2007
TundraTalk.net forum offers the most comprehensive collection of Toyota Tundra information. Find discussions on the Toyota Tundra Diesel, TRD Pro, SR5, lift kits, towing capacity, classifieds, and more!