OEM Brushed Stainless Step Board Install (PICS) - TundraTalk.net

Nice Rumble · 05-09-2008, 01:21 PM

I bought the step boards in the aftermarket and did the install. It's fairly straight forward and the only tools needed are:

Torque wrench-3/8" drive
Socket- 10 mm (M8 bolt), 12 mm
Extension- 3", 6"
Ratchet- 3/8" drive

First remove these bolts that are where you will bolt the brackets. You will find 8 on each side although the two front bolts on my truck were missing the upper bolts so I only had 7 each side. My truck must have been built on a Friday.

The package comes with 2 front brackets, 2 mid-front brackets, and 4 rear brackets.

The brackets are all labeled which makes things very easy.

Supplied in the kit are 32 M8 x 25 mm Sems Head Bolts.

Install the brackets in their proper position and only finger tighten.

Once they are in place they will be ready to accept the boards.

Place the board onto the brackets and finger tighten with the supplied bolts.

Once everything is in place and aligned front to back, tighten the bracket bolts to the frame using a torque wrench. The instructions said 25 Ft Lbs but later on said to tighten to 14 Lb FT. So, I think the 25 Lb Ft is an error. I went 14 Lb Ft and used some blue Loc Tight.

Once all the brackets are secure tighten the boards to the brackets using 14 Ft Lbs.

The finished product ready to stand on and support a lot of weight. I must say it does make getting into and out the truck much easier.

ramoine · 05-09-2008, 02:30 PM

Excellent write up , thanks !

Phoenix · 05-09-2008, 04:11 PM

Great photos! How long did it take?

Nice Rumble · 05-09-2008, 10:35 PM

Quote:

Originally Posted by Phoenix

Great photos! How long did it take?

Should only take about 45 minutes or less per side if you take your time and double check everything. The first side always takes a bit longer than the other as you're doing it for the first time.

euphoria · 05-09-2008, 11:57 PM

I like alot!

DrLivingston1980 · 05-10-2008, 02:32 PM

Where did you buy them and how much were they?

Nice Rumble · 05-10-2008, 04:05 PM

Quote:

Originally Posted by DrLivingston1980

Where did you buy them and how much were they?

$440 plus shipping.

Got them here:

Toyota Tundra Parts and Tundra Accessories Store : Step Board, Brushed Stainless Step Board Kit, Double Cab - 2008 Toyota Tundra [PT212-3407C] - $559.00$440.00

TOPSECRETTSI · 05-17-2008, 05:57 PM

They look good I was debating between these and the x-sp style steps and I decided I like the polished look better plus the x-sp ones don't hange below the frame so when I go offroad I won't bend them up.

hesperus · 05-18-2008, 01:45 PM

easy install as you said. like the brushed SS effect as they won't show scratches from boots etc. Got mine at the dealer as my salesguy said he could provide me with a 15% off for accessories. after looking out there at some of the reports of poor quality and early rust, decided these fit the bill. Paid $390 with the Taxachusetts 5% tax. Happy with the ease of installation and great pics there btw

jbk23 · 05-18-2008, 07:27 PM

Excellent write up , thanks !

05-09-2008, 01:21 PM	#1 (permalink)
Nice Rumble Member Join Date: Mar 2008 Location: Hopkinton, NH Posts: 34	OEM Brushed Stainless Step Board Install (PICS) I bought the step boards in the aftermarket and did the install. It's fairly straight forward and the only tools needed are: Torque wrench-3/8" drive Socket- 10 mm (M8 bolt), 12 mm Extension- 3", 6" Ratchet- 3/8" drive First remove these bolts that are where you will bolt the brackets. You will find 8 on each side although the two front bolts on my truck were missing the upper bolts so I only had 7 each side. My truck must have been built on a Friday. The package comes with 2 front brackets, 2 mid-front brackets, and 4 rear brackets. The brackets are all labeled which makes things very easy. Supplied in the kit are 32 M8 x 25 mm Sems Head Bolts. Install the brackets in their proper position and only finger tighten. Once they are in place they will be ready to accept the boards. Place the board onto the brackets and finger tighten with the supplied bolts. Once everything is in place and aligned front to back, tighten the bracket bolts to the frame using a torque wrench. The instructions said 25 Ft Lbs but later on said to tighten to 14 Lb FT. So, I think the 25 Lb Ft is an error. I went 14 Lb Ft and used some blue Loc Tight. Once all the brackets are secure tighten the boards to the brackets using 14 Ft Lbs. The finished product ready to stand on and support a lot of weight. I must say it does make getting into and out the truck much easier.

05-09-2008, 02:30 PM	#2 (permalink)
ramoine Senior Member Join Date: Jan 2008 Location: Huntington,Indiana Posts: 3,219	Excellent write up , thanks ! __________________ 2008 Crewmax X-SP carbon Fiber Dash kit 20" JTI Rims BFG AT KO 285/55/20 AFE C.A.I w/ Dry Pro filter and the AFE Mod Blacked out Headlight Mod. Flo~Pro muffler #744 Toytec 3" front , 1" rear blocks and Diff. lowering kit

05-09-2008, 11:57 PM	#5 (permalink)
euphoria Senior Member Join Date: Mar 2008 Location: Emporia, Ks Posts: 135	I like alot! __________________ 2008 DC, SR5, Black TRD Exhaust, TRD CAI

05-10-2008, 02:32 PM	#6 (permalink)
DrLivingston1980 Member Join Date: Apr 2008 Location: Maryland Posts: 60	Where did you buy them and how much were they? __________________ 2008 Toyota Tundra 5.7L Double Cab TRD Package/Silver Sky Metallic/SR5 4x4 Flowmaster Super 40 Straight Back Dual Exhaust System, Herculiner Bed Liner, aFe Stage 2 CAI Pro-Dry S Filter, SteelCraft Stainless Steel Step Bars

05-17-2008, 05:57 PM	#8 (permalink)
TOPSECRETTSI Senior Member Join Date: Nov 2007 Posts: 139	They look good I was debating between these and the x-sp style steps and I decided I like the polished look better plus the x-sp ones don't hange below the frame so when I go offroad I won't bend them up. __________________ 2007 Tundra dc sr5 4x4 5.7 trd blue streak metalic K&N 77 series intake, trd shifter and pedals, xsp style steps,underseat storage, timbren system 14.9@ 92mph (15.2 on streetfire tundra vs. vette) both completely stock 2004 mercedes c230 sport coupe 1992 eagle talon tsi awd modded

Remove Advertisements Sponsored Links
TundraTalk.net - Toyota Tundra Discussion Forum Advertisement

05-09-2008, 04:11 PM	#3 (permalink)
Phoenix Member Join Date: May 2008 Location: Phoenix, AZ Posts: 63	Great photos! How long did it take?

05-18-2008, 01:45 PM	#9 (permalink)
hesperus Junior Member Join Date: Jan 2008 Posts: 15	Got same ones for my regular cab easy install as you said. like the brushed SS effect as they won't show scratches from boots etc. Got mine at the dealer as my salesguy said he could provide me with a 15% off for accessories. after looking out there at some of the reports of poor quality and early rust, decided these fit the bill. Paid $390 with the Taxachusetts 5% tax. Happy with the ease of installation and great pics there btw

05-18-2008, 07:27 PM	#10 (permalink)
jbk23 Senior Member Join Date: Nov 2007 Location: Macon Georgia Posts: 531	Excellent write up , thanks ! __________________ 2008 X-SP CrewMax 5.7 IBTO PROUD MEMBER mods- 20% tint vent Visors Carbon fiber kit Bed extender bed liner 20 inch BBS wheels 305/55/20 Toyota all weather mats chrome,door handles/mirrors

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search