Projection Headlights Installation help please!

[SybErkRimInAL]

Figured it out. Turns out the white wire on the parking light is the negative. I just assumed it was positive, guess not. Green is positive on our parking light. Thanks for the help everyone.

[Mickey]

Originally Posted by SybErkRimInAL

Figured it out. Turns out the white wire on the parking light is the negative. I just assumed it was positive, guess not. Green is positive on our parking light. Thanks for the help everyone.

Sorry guy I was out of town for the week. I'm glad you got it done . I did upload in my photo gallery how I connected them. Also I bought more of those clips so I could have enough. Also I connected mine to the halo light (Low Beam) instead of the parking lights. This was by accident because I found those dang instructions after I had the first light working. Didn't want to change it.

[07SLATE5.7CRWMAX]

Just installed mine last night before the wife came home. Whew!. Ran it this morning and I'm sure the neighbors got a wake up call. It appears the projection is high. Mickey and Syber, did you guys have to adjust the beams so that they aren't so high? A thought about the yellow indicator - clip a wire so only the indicator works but not the parking. What do you guys think?

[SybErkRimInAL]

Originally Posted by 07SLATE5.7CRWMAX

Just installed mine last night before the wife came home. Whew!. Ran it this morning and I'm sure the neighbors got a wake up call. It appears the projection is high. Mickey and Syber, did you guys have to adjust the beams so that they aren't so high? A thought about the yellow indicator - clip a wire so only the indicator works but not the parking. What do you guys think?

Not sure what you mean by "indicator", do you mean the turn signal? sorry for my ignorance. And I haven't adjusted them. They do seem high but I just chalked that up to the fact that its a projector light and that's how they appear.

[Mickey]

Originally Posted by SybErkRimInAL

Not sure what you mean by "indicator", do you mean the turn signal? sorry for my ignorance. And I haven't adjusted them. They do seem high but I just chalked that up to the fact that its a projector light and that's how they appear.

Your turn signal and daytime running lights are the same Syber. That's what slate's talking about. I haven't adjusted mine but last night was a funny one. The wife flew in from Atlanta so we went to Chili's for dinner as I pulled up my halo's blinded the guy at the bar trying to pick up this girl. As we got out I noticed everyone staring at the lights through the windows. When we walked in the guy approached me asked about the lights and I gave him a description and where I got it. Funny thing when we went to leave the same guy sitting in the same place threw up his arms to block the lights from the truck as I started it. Again had everyone looking at it.
Gave a new meaning to "Blinded by the Light".

[smithy144]

where did you get those lights from get back at me

[SybErkRimInAL]

Originally Posted by smithy144

where did you get those lights from get back at me

Ebay, just search for "Black Halo Tundra Lights". You'll get a crapload of listings. They're all the same light. Should be around $300.00.

[Mickey]

Originally Posted by smithy144

where did you get those lights from get back at me

Form Ebay and the maker or person to look for is COSMOS DYNAMICS. They are listed as Halo LED Projection lights.
Mickey’s Traveling Tundra Crew | tundraheadquarters.com

[07SLATE5.7CRWMAX]

Do any of you with the Halo Projection know which wire controls the daytime running lights? I want to clip it so it doesn't spoil the projection and still be able to use the turn indicator.

[Mickey]

Originally Posted by 07SLATE5.7CRWMAX

Do any of you with the Halo Projection know which wire controls the daytime running lights? I want to clip it so it doesn't spoil the projection and still be able to use the turn indicator.

Actually you can have your daytime running lights turned off without cutting a wire.

[Mickey]

Syber I haven't checked on the amber light yet. Was planning on doing it today but ran into a problem yesterday. Took wife out on the boat for a little fishing trip. Went to a place I never traveled before and as usual the wife wanted to go left into alligator creek when I wanted to right into black creek. So I went along with her into aligator creek didn't get too far probably 300 yards when I hit an oyster bed. Went from 12 ft to 2 ft in 2 seconds. slid in 25ft. Well so much for excitement. Well 12 hours later when high tide came in we were off the reef about 9pm. Can you imagine nothing to do for 12 hours? Just a few scratches on the hull was all we got. Took another 3 hours to get back to the launch. Try to find your way back to the launch at night, alot different. I will research the light tomorrow and let you know.

[SybErkRimInAL]

Originally Posted by Mickey

Syber I haven't checked on the amber light yet. Was planning on doing it today but ran into a problem yesterday. Took wife out on the boat for a little fishing trip. Went to a place I never traveled before and as usual the wife wanted to go left into alligator creek when I wanted to right into black creek. So I went along with her into aligator creek didn't get too far probably 300 yards when I hit an oyster bed. Went from 12 ft to 2 ft in 2 seconds. slid in 25ft. Well so much for excitement. Well 12 hours later when high tide came in we were off the reef about 9pm. Can you imagine nothing to do for 12 hours? Just a few scratches on the hull was all we got. Took another 3 hours to get back to the launch. Try to find your way back to the launch at night, alot different. I will research the light tomorrow and let you know.

I'd never go anywhere called "Alligator creek". No big deal man, I gotta slow down on my modding anyway.

[smithy144]

putting this lights in seem to much you me.. do you think there easy to do.

[Mickey]

Originally Posted by smithy144

putting this lights in seem to much you me.. do you think there easy to do.

Make sure you find the directions first before you start. Mines were in the second box after I started. Also watch the painted piece bleow the headlight as you take it off. If you're facing the truck on the driver's side the right side of the piece has two plastic prongs which are hard to pull out. It's easy to break at least one prong. The pass side on the left also the same way. Since I didn't have my instructions I wired mines to the low beam (Halo Projection). It's suppose to go to that small amber light on the side of the lens.

[SybErkRimInAL]

In hindsight, very easy installation. But like Mickey said, you just have to be VERY careful when pulling off that plastic piece under the headlights. I broke the bracket that the prongs connect to and had to order one. 3 bucks, not bad. Once you get the lights, let me know and I can guide you through the installation.