Toyota Tundra Discussion Forum banner

VLED Footwell Bars wiring

555 views 1 reply 2 participants last post by  irishpride114 
#1 ·
So I bought the plug in play lights from VLED.

I noticed the other day, that small light in the footwell is not connected to the dome lights..ie if you turn on the interior lights with the switch, that little light does not come on.

I'd rather have the footwell lights wired to come on with the interior lights and anytime the switch is on.

Anyone have an idea of how to do this? The wires for the VLED lights are pretty small, so I thinking it might be difficult to get the VLED to the light wire.

Any advice or suggestions would be much appreciated. Thanks!
 
#2 ·
I will have to check mine. But I was thinking mine come on when you turn the interior master switch on, or open any of the doors, unlock the doors.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top