Programing features - TundraTalk.net

benny · 03-10-2008, 06:12 PM

How do you program the different features like doors unlocking,locking. How the interior lights stay on, and other things? In case it matters I have an 08 tundra crew max. Thanks

Skyhammer · 03-10-2008, 07:29 PM

For the 07, there is a list of things that can be changed on page 172 of the owners manual, although some things require that you have a LTD model.
I have turned off the auto door locks and the time some of the interior lights stay on.
This PDF show some things that the dealer can do for you.

Hawaii 5.7 · 03-10-2008, 10:17 PM

Hey Skyhammer... where you getting these? very cool. I'm gonna assume you need the factory computer to do these?

polcat · 03-16-2008, 07:41 PM

Hey Hawaii, how did you get your LED light bar to fit? Did you have to shave the lip on you bumper?
Sorry no relevance to the topic.

Mickey · 03-21-2008, 09:17 AM

Quote:

Originally Posted by polcat

Hey Hawaii, how did you get your LED light bar to fit? Did you have to shave the lip on you bumper?
Sorry no relevance to the topic.

I actually had to cut the top of the light to fit the spare tire square. It was about 1/4 - 1/2".

Skyhammer · 03-21-2008, 09:51 AM

Quote:

Originally Posted by Hawaii 5.7

Hey Skyhammer... where you getting these? very cool. I'm gonna assume you need the factory computer to do these?

I downloaded the shop manual from Toyota's site, then spent over 40 hours organizing, renaming and making folders for each subject.
You will need Toyota to use there computer to change the things listed in part 1. The stuff listed in part 2(bottom of page 27 on), can be done with those that have a Limited. I am not sure how much can be done for those that don't have a Limited. Everything I have tried to change so far has worked, but I have a Limited.

Mickey · 03-24-2008, 10:36 PM

Quote:

Originally Posted by Skyhammer

I downloaded the shop manual from Toyota's site, then spent over 40 hours organizing, renaming and making folders for each subject.
You will need Toyota to use there computer to change the things listed in part 1. The stuff listed in part 2(bottom of page 27 on), can be done with those that have a Limited. I am not sure how much can be done for those that don't have a Limited. Everything I have tried to change so far has worked, but I have a Limited.

What Toyota site? I have a limited also.

Hawaii 5.7 · 03-24-2008, 10:40 PM

Quote:

Originally Posted by polcat

Hey Hawaii, how did you get your LED light bar to fit? Did you have to shave the lip on you bumper?
Sorry no relevance to the topic.

Had to take mine off. It was rubbing the bottom of the tailgate and scratching the paint.

Gonna have to do some modification when i get some time. Probably have to shave some of that plastic like you said...

Hawaii 5.7 · 03-24-2008, 10:42 PM

Quote:

Originally Posted by Skyhammer

I downloaded the shop manual from Toyota's site, then spent over 40 hours organizing, renaming and making folders for each subject.
You will need Toyota to use there computer to change the things listed in part 1. The stuff listed in part 2(bottom of page 27 on), can be done with those that have a Limited. I am not sure how much can be done for those that don't have a Limited. Everything I have tried to change so far has worked, but I have a Limited.

Wow, lots of work. Thanks good info!

Too bad i don't have a limited.

polcat · 03-25-2008, 12:34 AM

Yea thats what mine was doing also. I didn't have the truck for two days before I tried it. The only way it would work for me would be a fun filled hour with the dremmel! Not so sure if I want to do it or not.

Mickey · 03-25-2008, 07:09 PM

Quote:

Originally Posted by Hawaii 5.7

Had to take mine off. It was rubbing the bottom of the tailgate and scratching the paint.

Gonna have to do some modification when i get some time. Probably have to shave some of that plastic like you said...

You couldn't get your's to slide down some? I haven't had that happen since I first installed it. The first time I set it in mines scraped also then I set it down and cut about a 1/4 - 1/2" for my jack to spare tire.

polcat · 03-25-2008, 11:48 PM

No I couldnt...I wish I could, but its no biggy. I might spend a little more time on it. If I cut that part, I mine as well cut out the hole for my camera. Its still a virgin right now. I like virgins......lol

smithy144 · 04-03-2008, 06:53 PM

is there going to be anything like a superchip that can plug in and out

YB929RR · 04-16-2008, 07:21 AM

Why can't I download your pdf?

Quote:

Originally Posted by Skyhammer

For the 07, there is a list of things that can be changed on page 172 of the owners manual, although some things require that you have a LTD model.
I have turned off the auto door locks and the time some of the interior lights stay on.
This PDF show some things that the dealer can do for you.

Mickey · 04-16-2008, 08:22 PM

Quote:

Originally Posted by YB929RR

Why can't I download your pdf?

I have the same problem. Couldn't downloadit. Also SKYHAMMER what site you got the download for a shop manual?

03-10-2008, 06:12 PM	#1 (permalink)
benny Member Join Date: Feb 2008 Location: MN Posts: 39	Programing features How do you program the different features like doors unlocking,locking. How the interior lights stay on, and other things? In case it matters I have an 08 tundra crew max. Thanks

03-10-2008, 10:17 PM	#3 (permalink)
Hawaii 5.7 Super Moderator Join Date: Sep 2007 Location: Hawaii Posts: 659	Hey Skyhammer... where you getting these? very cool. I'm gonna assume you need the factory computer to do these? __________________ 2007 TUNDRA 5.7 CREWMAX TRD 4X4 Revtek 2.5" Leveling Kit, Truxxedo Bed Cover, Billet Grill, Airhorn, Tints, Smoke Inchannel Visors & Bug Gaurd, Flowmaster Muffler w/ Custom Y-Pipe, Plus more to come...

03-16-2008, 07:41 PM	#4 (permalink)
polcat Senior Member Join Date: Mar 2008 Location: Crestview FL Posts: 101	Hey Hawaii, how did you get your LED light bar to fit? Did you have to shave the lip on you bumper? Sorry no relevance to the topic. __________________ Go big or go home!! Pioneer AVIC D1 Polk interior Custom Flowmaster cat back

03-25-2008, 12:34 AM	#10 (permalink)
polcat Senior Member Join Date: Mar 2008 Location: Crestview FL Posts: 101	Yea thats what mine was doing also. I didn't have the truck for two days before I tried it. The only way it would work for me would be a fun filled hour with the dremmel! Not so sure if I want to do it or not. __________________ Go big or go home!! Pioneer AVIC D1 Polk interior Custom Flowmaster cat back

03-25-2008, 11:48 PM	#12 (permalink)
polcat Senior Member Join Date: Mar 2008 Location: Crestview FL Posts: 101	No I couldnt...I wish I could, but its no biggy. I might spend a little more time on it. If I cut that part, I mine as well cut out the hole for my camera. Its still a virgin right now. I like virgins......lol __________________ Go big or go home!! Pioneer AVIC D1 Polk interior Custom Flowmaster cat back

Remove Advertisements Sponsored Links
TundraTalk.net - Toyota Tundra Discussion Forum Advertisement

04-03-2008, 06:53 PM	#13 (permalink)
smithy144 Junior Member Join Date: Mar 2008 Location: roseville ca Posts: 11	is there going to be anything like a superchip that can plug in and out

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search