Looks goods thats what a lot of guys do to there lexus IS'...I was thinking of doing that myself getting rid of my Wood Grain but the wood is growing on me...yes sold my Tundra bought a IS350 just keep lurking here from time to time.. Might noe be able to see the picts but he does give the wrap info DIY: Carbon Fiber Wrap(lots of pics) - Club Lexus Forums
Okay its been a few weeks but I just didn;t have the time till this weekend, So I decided to go ahead and finish up atleast the center console since I had the dash apart to add my Hypertech spedo calibrator and it didn't take much more time to pull the center pieces off real quick since its all snap in except one set screw. I get to doing the door swicth panels next but right now the center looks all matching once again.
I also used a little 303 protectant on everything since the dash needed a good wipe down anyhows.
Well on to some pics since I know thats what everyone likes...
Hope every one enjoys... I also found that a little contact cement on problem holding spots helped really nicely and I also swicthed to 3M 90 material its a stronger hold but dried a little quicker so you got have everything planned and in place quickly.
__________________
The Following User Says Thank You to WTVa For This Useful Post:
That is awesome. What are all the extra switches for?
__________________ 08 DC 4x4 SR5 5.7 TRD
3+1 truxxx
Magnaflow cat-back single exit
working on custom K+N
Rear seat mod
Advantage tri-fold bed cover
Toyota all weather floor mats
That is awesome. What are all the extra switches for?
Hmmm let me think from left to right...
VSC Bypass, allows me to let it automaticly bypass on startup or not
SPG Bypass, allows the GPS system to be bypassed at any time.
Rear Camera on, allows for the rear camera to be displayed at any time.
Nice job. How hard were the sides to do on that lower part? I imagine there was a lot of stretching there.
__________________
Banned from IBTO-Fah-Q for being "smug and elitist" while also being "a good guy" and "very informative." - John ****
Yeah, doesn't make sense to me either. Basically I got banned for having my own opinion on this site and I didn't fit their idea of a "TundraDork" or whatever they changed their name to.
Quote:
Originally Posted by ****
Do not mention his name here. He spits on us and talks crap and you're directing people to him from our site? I don't think so. I know you're neutral and that's fine, but please do not mention him here.
Nice job. How hard were the sides to do on that lower part? I imagine there was a lot of stretching there.
Actually it wasn't to bad once you get the the front in place and stuck down it was a matter of just pulling on the corners slowly till it all smoothed out and that was it.
I think most folks could do their own if they took there time or just pay me to do it for them. I do enjoy doing my DIY projects doh.
Also from some of the stuff I seen posted by from you Toxarch you should have no problem with this little project.
4.7 L 4x2 Slate Metallic
2008 Crewmax/SR5, TRD, 4x4, 5.7...
08 DC 4x4 SR5 5.7 TRD
