Tailgate...how do you remove it? - TundraTalk.net

TexEddie · 06-25-2008, 01:01 AM

2008, DC.

So, I'd like to remove the tailgate to see if it's the cause of my bump/thump.

Procedures to remove would be appreciated.

thx

Toxarch · 06-25-2008, 01:32 AM

Open the tailgate and remove the cables on either side. Close the tailgate half way (45 degree angle) and then lift up on the right side. Once that side is out, slide the tailgate to the right and it's off the truck.

Cyprex · 06-25-2008, 01:34 AM

Edit, Toxarch beat me to it!

jpnca · 06-25-2008, 01:43 AM

Drive around with it down......it will fall off

TexEddie · 06-25-2008, 08:56 AM

Quote:

Originally Posted by Toxarch

Open the tailgate and remove the cables on either side. Close the tailgate half way (45 degree angle) and then lift up on the right side. Once that side is out, slide the tailgate to the right and it's off the truck.

pree-shate it

2008_CrewMax · 06-25-2008, 03:00 PM

put a little bit of weight on it .. it'll come off

SybErkRimInAL · 06-25-2008, 03:32 PM

might as well ask here. How do i remove my tail lights?? I have the plastic bedliner.

2008_CrewMax · 06-25-2008, 03:48 PM

Quote:

Originally Posted by SybErkRimInAL

might as well ask here. How do i remove my tail lights?? I have the plastic bedliner.

put the vinyl on while on the truck .. its easier because the tail light is stationary

but im pretty sure it's just 2 screws for the tail lights .. not sure if you have to remove the bedliner or not

i snapped a couple picture of my tinted tail lights last night

they're on my laptop at home .. ill post 'em tonight

Toxarch · 06-25-2008, 04:10 PM

Quote:

Originally Posted by SybErkRimInAL

might as well ask here. How do i remove my tail lights?? I have the plastic bedliner.

I don't think the bedliner will cover the screws. Remove the two torx screws on the tailgate side of the bed wall. Then the tail light is just held by a couple of rubber friction tabs. Pull the tail light out perpendicular to the truck and it will pop right out.

2008_CrewMax · 06-25-2008, 04:12 PM

Quote:

Originally Posted by Toxarch

I don't think the bedliner will cover the screws. Remove the two torx screws on the tailgate side of the bed wall. Then the tail light is just held by a couple of rubber friction tabs. Pull the tail light out perpendicular to the truck and it will pop right out.

yea i didnt think it would cover the screws .. i dont have my truck with me today so i couldnt check, but i do recall seeing the screws and i also have the factory bed lines

SybErkRimInAL · 06-25-2008, 05:06 PM

I"m having them tinted by clearcoat mixed with some paint so I need them off. Thanks for the directions. How about the yellow markers on the tow mirrors? Do those just pop off with a screw driver??

Rollin Thunder · 06-25-2008, 05:14 PM

Quote:

Originally Posted by 2008_CrewMax

put a little bit of weight on it .. it'll come off

THAT'S SOME FUNNY $HIT !!!!!

2008_CrewMax · 06-25-2008, 06:28 PM

Quote:

Originally Posted by SybErkRimInAL

I"m having them tinted by clearcoat mixed with some paint so I need them off. Thanks for the directions. How about the yellow markers on the tow mirrors? Do those just pop off with a screw driver??

I actually have no idea on these

algolfer69 · 06-25-2008, 07:07 PM

Cutting Torch and 8# sledge.

Mickey · 06-26-2008, 09:33 PM

Quote:

Originally Posted by algolfer69

Cutting Torch and 8# sledge.

Congrats on 200 post

06-25-2008, 01:01 AM	#1 (permalink)
TexEddie Member Join Date: Mar 2008 Posts: 52	Tailgate...how do you remove it? 2008, DC. So, I'd like to remove the tailgate to see if it's the cause of my bump/thump. Procedures to remove would be appreciated. thx

06-25-2008, 01:32 AM	#2 (permalink)
Toxarch Senior Member Join Date: Apr 2008 Location: Fort Worth, Texas Posts: 1,121	Open the tailgate and remove the cables on either side. Close the tailgate half way (45 degree angle) and then lift up on the right side. Once that side is out, slide the tailgate to the right and it's off the truck. __________________ 2007 SR5 Crewmax 5.7L 4x4 All mod descriptions and pictures © 2007,2008 by Toxarch. They may copied only for personal use and the mods may be done for non-profit only.

06-25-2008, 01:34 AM	#3 (permalink)
Cyprex Senior Member Join Date: Aug 2007 Location: San Jose, Ca Posts: 154	Edit, Toxarch beat me to it! __________________ 07 5.7L Sky Silver Double Cab -EGR Vents/Bug guard -TRD Sway bar -Corsa Touring Exhaust -Charcoal filter delete

06-25-2008, 01:43 AM	#4 (permalink)
jpnca Super Moderator Join Date: Apr 2007 Location: San Gabriel Valley Posts: 2,102	Drive around with it down......it will fall off __________________

06-25-2008, 03:00 PM	#6 (permalink)
2008_CrewMax Senior Member Join Date: Mar 2008 Location: Southern California Posts: 4,445	put a little bit of weight on it .. it'll come off __________________ White Tundra Club Member #2

Remove Advertisements Sponsored Links
TundraTalk.net - Toyota Tundra Discussion Forum Advertisement

06-25-2008, 03:32 PM	#7 (permalink)
SybErkRimInAL Senior Member Join Date: Aug 2007 Location: Palm Springs, CA Posts: 1,836	might as well ask here. How do i remove my tail lights?? I have the plastic bedliner. __________________ Black 08 CM Post purchase Mods/Upgrades (click on item to view pic) AFE CAI Borla Dual Catback Projection Halo Headlights

06-25-2008, 05:06 PM	#11 (permalink)
SybErkRimInAL Senior Member Join Date: Aug 2007 Location: Palm Springs, CA Posts: 1,836	I"m having them tinted by clearcoat mixed with some paint so I need them off. Thanks for the directions. How about the yellow markers on the tow mirrors? Do those just pop off with a screw driver?? __________________ Black 08 CM Post purchase Mods/Upgrades (click on item to view pic) AFE CAI Borla Dual Catback Projection Halo Headlights

06-25-2008, 07:07 PM	#14 (permalink)
algolfer69 Senior Member Join Date: Apr 2008 Location: Lake Charles, La. Posts: 1,196	Cutting Torch and 8# sledge. __________________ *WHITE TUNDRA CLUB MEMBER #5* 2007 DC SR5 TRD 5.7 JBL STEREO SYSTEM LEATHER VOLANT CAI MAGNAFLOW EXHAUST BLACKED OUT HEADLIGHTS MUD GAURDS EGR DEFLECTOR

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search