Roxanne: 2011 CM Platinum 4WD 5.7 Mid-Travel/Overland/Hunting Rig Build Page
As much as I liked the Tundra, there were too many issues looming (like the rear wheel bearings, leaking cam towers, etc.) that I didn't want to deal with. Additionally, while the Tundra was an impressive truck in every sense of the word, it became a bit uninspiring. There were so many Tundra's running around town that it was easy to blend into the crowd. Plus, my wife was never going to be comfortable driving it so it sat for much of the time while I was traveling...
So, I found something to give me some motivation and a project!
If you're bored, check out Bleu Belle here: http://www.wranglerforum.com/f330/95-yj-bleu-belle-ver-2-0-a-2161137.html#post31669353
--------------------------------- ----------------------------------- -------------------------------------
!!!SOLD!!!
As she sits today:
Suspension, Wheels & Tires:
Performance Mods:
Exterior Mods:
Interior Mods:
2016 Planned Mods:
Late 2016 to 2017 Planned Mods:
As much as I liked the Tundra, there were too many issues looming (like the rear wheel bearings, leaking cam towers, etc.) that I didn't want to deal with. Additionally, while the Tundra was an impressive truck in every sense of the word, it became a bit uninspiring. There were so many Tundra's running around town that it was easy to blend into the crowd. Plus, my wife was never going to be comfortable driving it so it sat for much of the time while I was traveling...
So, I found something to give me some motivation and a project!
If you're bored, check out Bleu Belle here: http://www.wranglerforum.com/f330/95-yj-bleu-belle-ver-2-0-a-2161137.html#post31669353
--------------------------------- ----------------------------------- -------------------------------------
!!!SOLD!!!
As she sits today:
Suspension, Wheels & Tires:
- Fox 2.5 IFP Front shocks (w/ 1 CB shim on driver's side)
- Fox 2.0 Rear shocks
- Total Chaos Uniball UCAs
- American Outlaw Charcoal Armor: 18" x 9", +10 mm offset
- 305/65 BFG A/T KO2
Deaver K37 Spring Packs, 11-leaf- Wheeler's 1.5" AAL
- Coachbuilder Poly Rear Bushings
- Total Chaos shackles
- Wheeler's Super Bumps
Performance Mods:
- Gibson Dual Sport, Side Exit Exhaust, Stainless
- K&N Drop in Filter
- Power Stop K26 Brake & Rotor Kit
Exterior Mods:
- Bushwhacker Fender Pocket Flares
- Stubby CF antenna
- CBI Ditch Light Brackets w/Hella LED cubes
- White Knuckle Off-road Sliders (0.188" DOM)
- Relentless Fab Body Mount Chop Plates
- Wheel-well liner mod and pinch weld hacking
Interior Mods:
- 20%... does tint count as a mod?
- Air On Board (eBay) Factory-style switches
2016 Planned Mods:
Tint front windows to match rearDone!LED Bumper Reverse LightsDone!Viair 440c compressor with 3-gallon tank, OBA kitDone!White Knuckle Racing 0.188" SlidersDone!CBI Ditch Light Brackets w/Hella LED cubesDone!KC Cyclone Rock LightsDone!- Breather mod (purchased, gotta get some other stuff done first)
- Demello Hidden Winch Bumper
- Line-X bed of truck
- Budbuilt Skids
- Front Runner Bed Rack and expedition accessories (Hi-Lift, shovel, gas cans, Wilco In-Bed Tire Carrier, etc)
- Energy Suspension R&P Bushings (ordered... just waiting to be installed)
- Total Chaos spindle gussets (also ordered... gonna install alongside ES bushing above)
Late 2016 to 2017 Planned Mods:
- Auburn Pro LSD (possible ARB) w/4.88 gears
- 35 x 12.5 MT's now that the kids can easily get in and out of the truck thanks to the WKO sliders (ironically, the N-Fab steps were awkward for them).
- Fox 2.5 Resi's from and rear
- Dakkar Heavy Rear Springs