I have a 2010 Tundra DoubleCab that my father gave me when he passed. So, I definitely am keeping this truck and I don't really want to do too many mods to it. It has the 5.7L V8 and he already had a Magnaflow catback installed. So that is definitely a plus IMO.
Anyway, the OEM unit that was in this was low level to say the least. I have aftermarket equipment in all of my vehicles but I want to try a factory look this time.
So, I bought a 2012 Toyota OEM Navigation system and it is simply plug and play. Steering wheel controls, Aux input, Navigation... everything works.
BTW, I am thinking of getting 2 Sundown Audio SD210's in a ported box for under the seat and a Sundown amp as well.
In the meantime here are a few pics of the installation. I may add a video in the future. I have to get use to the controls but all in all I really like it.
I just ordered the JBL navi from another member, but I was wondering if you guys had a pdf or instructions on how to take out the original stereo?
I have been looking and cannot seem to find anything on it. I have the bucket seats up front, and the only one I found was with the bench seating up front.
Thanks everyone! (not meaning to jack this thread )
Can someone tell me, since tapping the blue in the passenger side to the black in the K6 and the white to the red in the K6, I can't get the truck into gear, FW, RW, N, nothing. is this related or something else?
I think you have a capital T in his email address it should look like this tahirmallick@hotmail.com this is the one I used and he got back to me a matter of minute's try it.
That is the one I used 4 times now. It will not send with a capitol T
I think he does not like me? I will paypal the pay pal fees the cost of the K plug and any extra shipping if you can buy it for me and send it??? I have know idea what else to do?
Bly, try looking in a folder in your email acct on your phone or computer called bulk mail or a spam file. I have yahoo and sometimes I get mail in a file called bulk mail when I expect it in my regular emailif its not there send me your email and I will email it to him. I know if you go to pay pal his email address is his pay pal acct name if that helps.
Can anyone please tell me the bluetooth mic part number or direct me to a site to order it so I can add it to my new 2012 navigation unit. I ordered my K6 plug, so I'd like to do everything at once to save some hassle. I have an 07 DC SR5 model, has anyone succesfully put the 2012 in and have it operating correctly if so please send me an email or something or pics of the wires and so on. It would be greatly appreciated.
thanks.
Just got done with the k6 install and sub install. I got the speed signal like everyone else from #3 on the k3 plug white wire. I got the reverse input like some stated in earlier post from the gray connector behind the radio. I confirmed with a test light was good. I now have turn by turn and voice guidance also my reminder milage works too. Here is a pic of the gray connector it was the bottom row 3 from the left mine was a solid red wire
[/IMG]
Also installed the supplied USB/aux and everything works there too. Thank you for everyone's input on this install.
It is nice to see that guys are getting this install completed with little to no issues. Now I just wish I could source a NAV unit! eBay is bone dry along with the forums!
I just ordered one and received it on wednesday from a guy in texas if you're interested. Let me know. I don't get anything for referring people. It was a good deal. Gonna try to install Tomorrow.
I just ordered one and received it on wednesday from a guy in texas if you're interested. Let me know. I don't get anything for referring people. It was a good deal. Gonna try to install Tomorrow.
It shows the three different entune options available from Toyota. The top 2 list satellite as an option, but the bottom unit (same unit that has been going around) does not list sat as an option. Has anyone been able to successfully run SAT radio on this HU?
I have the non jbl 2012 nav unit, can anyone please tell me the part number or something of where I can get the microphone for this unit so I can use the bluetooth/phone option. I've been searching everywhere and can't find the mic. Also does anyone know of a bypass so passenger can set the nav directions.
Thanks in advance,
Dave.
I have the non jbl 2012 nav unit, can anyone please tell me the part number or something of where I can get the microphone for this unit so I can use the bluetooth/phone option. I've been searching everywhere and can't find the mic. Also does anyone know of a bypass so passenger can set the nav directions.
Thanks in advance,
Dave.
X2 Where or how can I get the bluetooth working if I think there is not even a plug up there for a Mic. I took the bezel down and only saw the rear camera plug?
Has anyone been able to hook the back up camera? I was finally able to source a USB cable just looking to get the back up camera to work before i finally finish this project....
I am in the middle of the install. I did a lot of reading, downloaded the Preimun Audo (JBL) Nav install guide and Sat unit install guide. Purchase the connectors needed, so I though. I am almost done and ran into this problem. I am changing over from a 2011 with JBL 6 Disk w/ BT to a 2012 JBL Nav Unit. The instuctions from the fourm showed I need to move pins 1,2 and 7 from K9 to the new Mic Connector. My truck does not have the K9 connector. Anyone know were I can take the MIC from, this must have been a 2010 change.
Just an quick update on the K6 plug and getting in touch with tahirmallick@hotmail. com. Through the assistance of BigDzee and some eBay searching I was able to get in touch with him and send the $15 payment through paypal. It appears that particular email addresses get sent directly to his SPAM folder; therefore, Tahir is never receiving the emails. He indeed wants all of our business and is not ignoring anyone.
If you have in the past attempted to contact him and are still having issues you can do the following:
1. Try sending from a different e-mail address if possible (i used a different gmail address and he received it)
2. Login into eBay (if possible). To the right of the search button at the top of the screen is the advanced option (click it). On the left search for items BY SELLER. Tahir uses the seller ID toyolexnavspec. This name should bring up his items. View his profile and send him a message via eBay.
I had my wife send from her Ipad and it went right through
Her email account also. I have the turn x turn working and its all good
Can anyone help with the Bluetooth? I took the overhead down and only see an empty plug that I believe is the rear camera plug ? No mic up there but a nice place to put one. Its a 2010. quad cab. The blue tooth is my next goal with this 330 dollar so far great Nav HU with turn X turn. I am hoping to get the bluetooth working on the thrift.
OK for the Bluetooth mic, I kept searching and found no info so going with nothing I asked tahir that had the k6 plugs. He in fact can make you the Bluetooth mic/adapter just ask him to make it extra long so you can run it up the a pillar to put it up top in the overhead console. I just put it under the lip of the dash. Its small so it looks decent and am not worried about it.it ran 125.00 and was very clear when calling out and I heard everything from the speakers. Hope this helps everyone out. My only this is I can't seem to get my rear back up working on my 2012 non jbl nav unit, it works on the mirror but not the nav unit. I tapped the blue wire in the right kick panel and ran it to the unit but nothing. Any info would help me greatly.
Dave.
I had my local shop today install the k6 connector because I have zero wiring experience...i gave them instructions from the forum and which wires to tap...they got the speed senor from behind the dash and the reverse wire from the passenger side kick panel...the turn by turn now works but I have a bunch of lights on on my dash...the 4lo is blinking and the trac off and engine light is on. Did this happen to anyone else during there install if so any help to solve this is appreciated. The truck drives fine, no loss of power or anything like that. Thanks in advance.
The installer should not have been behind the dash, I got my speed sensor wire from actually behind the radio close to the k6 plug. I would go back to the installer have him remove whatever he did and make the wires right. The speed sensor can beat app from behind the radio.
Sorry I meant to say behind the radio...I am taking it back in tomorrow, what should I tell them to look for??
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Toyota Tundra Discussion Forum
2.2M posts
161.2K members
Since 2007
TundraTalk.net forum offers the most comprehensive collection of Toyota Tundra information. Find discussions on the Toyota Tundra Diesel, TRD Pro, SR5, lift kits, towing capacity, classifieds, and more!