PRG upper control arms

[bullardshaun]

Last week I picked up a set of PRG upper control arms to go along with my extended length Sway-A-Way coilovers. The control arms have heim inner pivots (instead of polyurethane bushings) for alignment purposes, and a 1" uniball to replace the stock balljoint. The arms cost $649 and are available @ prgproducts.com Here are a couple pics:

ABS bracket

Misalignment spacers

[Toxarch]

I knew PRG was making some UCAs for the Tundra, but hadn't seen them yet. Thanks for the pictures.

[bullardshaun]

Originally Posted by Toxarch

Thanks for the pictures.

No problem, here are a couple of pics before I installed them ( install was simple BTW):

abs tab

[dani7]

nice!! how about a full truck shot!!! I want see this baby

[bullardshaun]

Originally Posted by dani7

nice!! how about a full truck shot!!! I want see this baby

It doesn't look like much now, it's kind of a sleeper lol. It looks exactly the same as this picture ( this pic was before I had uppers and rear SAW's)

I also have these damn things sitting in my living room haha

[Toxarch]

You might want to adjust the brake line in the left clamp. It's not sitting properly in the clamp and will rub in the future.

[Toxarch]

If you don't want those beadlocks, you can feel free to send them to me.

[bullardshaun]

Originally Posted by Toxarch

You might want to adjust the brake line in the left clamp. It's not sitting properly in the clamp and will rub in the future.

Thanks, I didn't notice that ( you're talking about the thicker part of the ABS wire, right?)

Originally Posted by Toxarch

If you don't want those beadlocks, you can feel free to send them to me.

LOL, Okay, but the shipping is going to be about $250 per wheel hahaha

[Toxarch]

Originally Posted by bullardshaun

Thanks, I didn't notice that ( you're talking about the thicker part of the ABS wire, right?)

Yes, the thicker part should be in the clamp.

Originally Posted by bullardshaun

LOL, Okay, but the shipping is going to be about $250 per wheel hahaha

I can come by and pick them up myself. Save money on the shipping.

[bullardshaun]

Originally Posted by Toxarch

I can come by and pick them up myself. Save money on the shipping.

Gas is expensive out here in California, but it'd be worth it if you had a Vespa with a side car to carry them in haha.

[dani7]

Originally Posted by bullardshaun

It doesn't look like much now, it's kind of a sleeper lol. It looks exactly the same as this picture ( this pic was before I had uppers and rear SAW's)

I also have these damn things sitting in my living room haha

I love these wheells!!! are you going build a custom front bumper?

[bullardshaun]

So do I lol, I actually like Walker Evans wheels better, but I didn't want to run 20's. What really sucks is that I had these brand new BFG 315-70-17's but sold them because my wife had to go on a medical leave at work and I didn't want to get behind on bills.

[dani7]

Originally Posted by bullardshaun

So do I lol, I actually like Walker Evans wheels better, but I didn't want to run 20's. What really sucks is that I had these brand new BFG 315-70-17's but sold them because my wife had to go on a medical leave at work and I didn't want to get behind on bills.

yea Walker Evans are nice!! I wish the made robey Gordan's for us. Good luck with the build cant wait to see it when its all done!

[bullardshaun]

Originally Posted by dani7

are you going build a custom front bumper?

I plan on getting a simple tube bumper made, as well as Trailer Products front fenders. I'm also going to get my stock rear fenders pulled and cut like this:

[bullardshaun]

Originally Posted by dani7

yea Walker Evans are nice!! I wish the made robey Gordan's for us. Good luck with the build cant wait to see it when its all done!

I like the black RG's a lot. The project is almost done , I've got the most expensive parts already, I just need a bumper, fenders and tires and I'm done. I figure it'll be a decent little truck. I like to think of my Tundra as a fat overweight Tacoma