Tundra Winch bumper Design feadback - Page 3 - TundraTalk.net

Wallygator · 04-16-2008, 10:42 PM

Actually I think I would prefer it if you had a no hoop option. Thanks.

jfonz · 04-16-2008, 11:16 PM

Quote:

Originally Posted by Wallygator

Actually I think I would prefer it if you had a no hoop option. Thanks.

It will have a no hoop option....

Fireball · 05-05-2008, 05:48 PM

It looks good but the bar that goes over the top of the bumper it covers 90% of the front grill`s crome and that is what tundra gets a lot of its LOOKs.
What do you think cats ??

kmlambie · 05-09-2008, 10:17 AM

It looks really good. I'd sure like to see it from the "side" too.

Can you post up a picture of that as well ??

Thanks

jfonz · 05-10-2008, 11:17 AM

Quote:

Originally Posted by kmlambie

It looks really good. I'd sure like to see it from the "side" too.

Can you post up a picture of that as well ??

Thanks

Its Just in CAD right now and the Tundra is 1d so you can't really see a good side view...

I might have a remedy for this by tonight....

jfonz · 05-11-2008, 10:22 PM

We went ahead and made a prototype....

Bullbar and hoop designs will be coming shortly...

swank501 · 05-11-2008, 11:12 PM

very nice!!!!!!!!

3/16" or 1/8" plate? I like the way you guys were able to "tighten" up around the bottom where the frame hangs down. Not to get to excited, but can we expect a similar rear design as well?

jpnca · 05-11-2008, 11:24 PM

I like it as it sits now. I like how it follows the lines of the truck. Powercoat it black and send it to me

jfonz · 05-11-2008, 11:49 PM

Quote:

Originally Posted by swank501

very nice!!!!!!!!

3/16" or 1/8" plate? I like the way you guys were able to "tighten" up around the bottom where the frame hangs down. Not to get to excited, but can we expect a similar rear design as well?

the outer skin is 3/16". the inner is a combination of 3/16" and 1/4".

Rear will most likely have similar design cues and is in the works.

Possum · 05-12-2008, 01:07 AM

Possum wuntsit!! Must have it, yess, in the blackness, with hoop, froglights and matching rear. I'll trade my first wife for it, OK?,fine. Keep us posted.

rod67 · 05-14-2008, 08:47 AM

Looks great!
Are you going to do a rear winch mount as well?

jfonz · 05-14-2008, 10:47 AM

Quote:

Originally Posted by rod67

Looks great!
Are you going to do a rear winch mount as well?

We haven't looked at that yet, but we will. Sofar we are looking at the possiblity of a optional tire carrier system that would be removeable...

ramoine · 05-14-2008, 12:27 PM

Quote:

Originally Posted by jfonz

We haven't looked at that yet, but we will. Sofar we are looking at the possiblity of a optional tire carrier system that would be removeable...

I have not read anything about how much it will weigh ? I have seen your applications for the FJ Cruiser and they look great , I'm a big fan of FF !

Cypress · 05-14-2008, 10:13 PM

how about some form of headlight protection, I prefer function over looks, but why not incorporate both

rod67 · 05-15-2008, 07:44 PM

I'm not real crazy about a tire carrier - seems like it would get in the way of the tailgate. Just wanted a good rear winch mount.

04-16-2008, 10:42 PM	#31 (permalink)
Wallygator Senior Member Join Date: Feb 2008 Location: NC Posts: 110	Actually I think I would prefer it if you had a no hoop option. Thanks. __________________ 2008 Tundra Crewmax 4X4

05-09-2008, 10:17 AM	#34 (permalink)
kmlambie Junior Member Join Date: Apr 2008 Posts: 7	looks good It looks really good. I'd sure like to see it from the "side" too. Can you post up a picture of that as well ?? Thanks __________________ 07 dbl cab 5.7 TRD, desert sand, leveled, flowmaster 50 suv. De-badged, polished nerf bars, billet grill..........

05-11-2008, 10:22 PM	#36 (permalink)
jfonz Junior Member Join Date: Apr 2008 Posts: 27	We went ahead and made a prototype.... Bullbar and hoop designs will be coming shortly... Last edited by jfonz : 05-11-2008 at 10:34 PM.

05-11-2008, 11:12 PM	#37 (permalink)
swank501 Junior Member Join Date: Nov 2007 Posts: 13	very nice!!!!!!!! 3/16" or 1/8" plate? I like the way you guys were able to "tighten" up around the bottom where the frame hangs down. Not to get to excited, but can we expect a similar rear design as well? __________________ 1996 SAS Tacoma sold 2007 Tundra RCSB 4x4 5.7

05-11-2008, 11:24 PM	#38 (permalink)
jpnca Super Moderator Join Date: Apr 2007 Location: San Gabriel Valley Posts: 1,601	I like it as it sits now. I like how it follows the lines of the truck. Powercoat it black and send it to me __________________

Remove Advertisements Sponsored Links
TundraTalk.net - Toyota Tundra Discussion Forum Advertisement

05-05-2008, 05:48 PM	#33 (permalink)
Fireball Junior Member Join Date: May 2008 Posts: 14	It looks good but the bar that goes over the top of the bumper it covers 90% of the front grill`s crome and that is what tundra gets a lot of its LOOKs. What do you think cats ??

05-12-2008, 01:07 AM	#40 (permalink)
Possum Senior Member Join Date: Nov 2007 Location: Bremerton, WA Posts: 159	ooooohhhgodam! Possum wuntsit!! Must have it, yess, in the blackness, with hoop, froglights and matching rear. I'll trade my first wife for it, OK?,fine. Keep us posted.

05-14-2008, 08:47 AM	#41 (permalink)
rod67 Member Join Date: Sep 2007 Posts: 48	Looks great! Are you going to do a rear winch mount as well?

05-14-2008, 10:13 PM	#44 (permalink)
Cypress Junior Member Join Date: May 2008 Posts: 1	how about some form of headlight protection, I prefer function over looks, but why not incorporate both

05-15-2008, 07:44 PM	#45 (permalink)
rod67 Member Join Date: Sep 2007 Posts: 48	I'm not real crazy about a tire carrier - seems like it would get in the way of the tailgate. Just wanted a good rear winch mount.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search