|
Well I did it today and it is nice. The Cargo light and canopy light are hard wired together and while I was at it I ran two extra wires from the rear left tailgate to the cab just in case for future use. I taped (electrical tape)and covered the wires with that plastic stuff (wire cover, unsure of name). I fed it along the frame from the rear into the engine compartment and then into the cab where it meets up with the cargo light wire heading back to the light itself. So the switch runs in conjunction with the original. I like that set up the best and it seems very OEM. Any questions I will gladly help for $5. Just joking!!
|