Quote:
Originally Posted by smithy144
putting this lights in seem to much you me.. do you think there easy to do.
|
Make sure you find the directions first before you start. Mines were in the second box after I started. Also watch the painted piece bleow the headlight as you take it off. If you're facing the truck on the driver's side the right side of the piece has two plastic prongs which are hard to pull out. It's easy to break at least one prong. The pass side on the left also the same way. Since I didn't have my instructions I wired mines to the low beam (Halo Projection). It's suppose to go to that small amber light on the side of the lens.
