Quote:
Originally Posted by SybErkRimInAL
Just ebay "08 Tundra black halo" and you'll get a bunch of choices. They should be street legal, I dont see why they wouldn't be.
Mickey,
I guess my age and IQ are on par. Okay, looking at the instructions, I can tell nothing. I understand what youre saying you did but I dont know how you did it. I found my instructions and they came with the 4 blue clips. Each clips looks like it's supposed to house two wires but only one of the holes goes all the way through on each clip. My questions are,
What two sets of cables did you hook up to each other via the clips? Did you do two black wires on one clip and two white wires on the other? If so, which two? There is one set of wires, black with white squares and a white with black squares on it that come out of the 3 little lights. Then there's another pair of wires, solid black and solid white that come out of the light bar next to the 3 little lights. Then there's another pair that look like they go to the halo, white with black stripe and a solid black wire.
So I grab a blue clip and put what two wires into it? What two wires go into the second clip? To make things easier, lets just call the wires that come out of the 3 lights, wires A. The ones that come out of the light bar, wires B and the ones that come out of the Halo, wires C. Many thanks in advance and again, sorry for my constant bugging. No rush on this, whenever you have a spare 8 hours.  |
First you need more of those clips. I bought a box of ten. What I did was take out of the 6 wires on the halo you have 3 white and 3 I think were black or another design meaning white with black stripes or boxes like you said. You need to tie the 3 white together first taking the longest one to be the main wire then tie the other 2 white wires about an inch apart then you will have all wires connected to the longest white wire. I tied them together using the clips. Do the same for the other 3 wires. Then you will connect those to the amber light on the side. I matched my white with black stripes to the wire that had a stripe on it. Then I took the white wire to the other wire and clamp the clip. Now it's a little tuff here because of the room and you have to pull back some of the wire protector to see which one you want and then put your clip on that wire and then take your 3 wires connected together and put them into the clip squeeze with pliers and you have a connection. Once you're done with one side check it out. Then do the same process on the other. It's no bother telling you this because I went the wrong way on mines because I couldn't find the instructions either. My wires by mistake connect to my low beam Halo not the little amber light. I may change this later. I just won't have any lights going on when I use just the parking lights. When I read the instructions I already had my pass side done connected. It worked fine so why change it. Good luck
If you want I will get some pics to show you. It will be tight but I should mange.